Quick Start Guide

Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide

Installing the LTE antennas

To use the Citrix SD-WAN 110-LTE-WiFi-SE appliance as an LTE modem, install the

antennas to the appliance. The antennas are included in the appliance package. The

Citrix SD-WAN 110-LTE-WiFi-SE appliance has two SMA coax male connectors at the

front and rear of the appliances. The antennas have independent rotating SMA female

connectors.

Note:

Ensure that both the LTE antennas are installed for better LTE cellular connectivity.

To install the antennas to the appliance:

1. Place the antenna SMA coax connector (F) on the appliance SMA coax connector

(M) and rotate the antenna connector clockwise, until the connector is tight.

Note: The recommended torque is 1.8 - 2.5 Lbs force-inch.

2. Adjust the antenna orientation and direction.