Quick Start Guide

Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide

You need to change the Ethernet port settings on the PC before you can set the

appliance management IP address. Record the original settings so you can restore

them after configuring the management IP address.

3. Change the IP address for the PC.

On the PC, open your network interface settings and change the IP address for

your PC to the following:

•

192.168.100.50

4. Change the Subnet Mask setting on your PC to the following:

•

255.255.0.0

5. On the PC, open a browser and enter the default IP address for the appliance.

Enter the following IP address in the address line of the browser:

•

192.168.100.1

Note

Use Google Chrome browser when connecting to a SD-WAN appliance.

Ignore any browser certificate warnings for the Management Web Interface.

This opens the SD-WAN management web interface login screen on the connected

appliance.

6. Enter the administrator user name and password, and click Login. After you have

logged into the management web interface, the Dashboard page appears.

•

Default administrator user name: admin

•

Default administrator password: password

Note:

From Citrix SD-WAN 11.0.3 release onwards, it is mandatory to change the

default admin user account password while provisioning any SD-WAN appliance or

a new SD-WAN SE VPX. This change is enforced using both virtual WAN CLI and

UI.