Quick Start Guide

Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide
7
Figure 2. Citrix SD-WAN 110-LTE-WiFi-SE back panel
Note: Port 1/1 is the default LAN port and port 1/2 is the default WAN port. Port 1/3 is
disabled. The default LAN IP is 192.168.0.1. For LTE appliances, the LTE SIM slot is also
the default WAN port. The WAN ports are configured as DHCP clients.
Port Label
Type
Description
LTE Antenna male
connector
Connector for LTE antenna.
1/1, 1/2 and 1/3 Traffic Network traffic
1/4 Management port Use standard mgmt. port description
USB 2 USB ports USB ports
Serial RS-232 serial An RS232 serial console port.
Power Power button
• Power OFF state:
o Press power button and
release it immediately: Power
on the appliance.
o Press power button and hold
it for 10+ seconds: Factory
reset the appliance.
• Power ON state:
o Press power button and
release it immediately:
Orderly shutdown the
appliance.
o Press power button and hold
it for 5+ seconds: Force
shutdown the appliance.
DC 12V DC Power Supply Refer System Specifications for power supply
information.