Product Info
Table Of Contents
- 1. Scope
- 2. LMU-1300 Hardware Specifications
- 3. LMU-1300™ Connectors
- 4. Getting Started
- 4.6 Backup Logs
- 4.7 File Components
- 4.8 Software & Script Updates
- 5. PEG2
- 5.2 PEG2 File
- 5.3 PEG2 TAG Definitions
- 5.4 Multiple Modifiers
- 5.5 PEG1 -> PEG2 Conversion
- 5.6 PEG2 Native Editor
- 6. LMU32 vs EdgeCore Platform Differences
- 6.3 Vehicle Bus PID Polling Rate
- 6.4 PEG2 “Lines”
- 6.5 Event Index Field
- 6.6 Remote Debug PEG Action
- 6.7 Modem/GPS Reset
- 6.8 SIM Form Factor
- 6.9 Boot Reason
- 6.10 Peg Resources
- 6.11 GPS
- 6.12 Motion Logs (1hz vs 5hz GPS Sample Rate)
- 6.13 Time Sync Precedence
- 6.14 Version String in ID Reports
- 6.15 Firmware Revision Convention
- 6.16 Status LEDs
- 6.17 Version Reports (App Message 111)
- 7. Preparing for Installation
- 7.1 Plan the Installation
- 7.2 Size and Placement of LMU unit
- 7.3 Installing the LMU in a Vehicle
- 8. Installation Verification
- 9. Certification
- 10. Version History
COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein. Page
Reproduction use or disclosure to third parties without express permission is strictly prohibited. ©2020 CalAmp 29 of 35
LMU-1300 Training Guide
Revision & Date
0.8–09/22/2020
Note that these processes are all based on issuing AT Commands to the LMU-1300™. It is expected that
installers will have access to a serial port expansion cable and a laptop or PDA capable of a terminal
connection. Alternatively, an SMS message can be sent to an LMU-1300™ to obtain its current status.
8.1 Comm Verification
Installers should first verify that the LMU-1300™ has been acquired and has registered to the wireless
network.
Comm may be verified using an AT Command: ATIC
Depending on the wireless network being used something similar to what is shown below will be
displayed. It is important to verify that 'Yes' values are displayed at the top for Data and Network
registration and the correct APN is displayed.
Radio Access : LTE
GSM Registered : Yes, Home
GPRS Registered : No, Searching
Connection : Yes
RSRP : -98 dBm
BER : 0
Channel : 0
Cell ID : 960049202
Base Station ID : 209924879
Local Area Code : 0
NetworkCode : 410
Country Code : 310
IMEI (Modem S/N): 864475040099839
IMSI (SIM ID) : 31017084578848884883
ICC-ID (SIM S/N): 89011703278457884883
Phone Number :
GPRS APN : LOJACK03.COM.ATTZ
Maint. Server : 216.177.93.236(216.177.93.236):20500
Inbound Server : 34.227.33.84(34.227.33.84):20500
Primary Service : srvc(0) log(0) radio(0) inbnd_index(0) mode(0)