Product Info

LTE Standard Module Series
EG95 Hardware Design
EG95_Hardware_Design 40 / 93
Table 9: Pin Definition of (U)SIM Interfaces
Pin Name
Pin No.
I/O
Description
Comment
USIM1_VDD
43
PO
Power supply for (U)SIM1 card
Either 1.8V or 3.0V is
supported by the module
automatically.
USIM1_DATA
45
IO
Data signal of (U)SIM1 card
USIM1_CLK
46
DO
Clock signal of (U)SIM1 card
USIM1_RST
44
DO
Reset signal of (U)SIM1 card
USIM1_
PRESENCE
42
DI
(U)SIM1 card insertion detection
USIM_GND
47
Specified ground for (U)SIM card
USIM2_VDD
87
PO
Power supply for (U)SIM2 card
Either 1.8V or 3.0V is
supported by the module
automatically.
USIM2_DATA
86
IO
Data signal of (U)SIM2 card
USIM2_CLK
84
DO
Clock signal of (U)SIM2 card
USIM2_RST
85
DO
Reset signal of (U)SIM2 card
USIM2_
PRESENCE
83
DI
(U)SIM2 card insertion detection
EG95 supports (U)SIM card hot-plug via USIM_PRESENCE (USIM1_PRESENCE/USIM2_PRESENCE)
pin. The function supports low level and high level detection, and is disabled by default. Please refer to
document [2] about AT+QSIMDET command for details.
The following figure shows a reference design for (U)SIM interface with an 8-pin (U)SIM card connector.