SC600Y&SC600T Hardware Design Smart LTE Module Series Rev: SC600Y&SC600T_Hardware_Design_V1.0 Date: 2019-07-01 Status: Preliminary www.quectel.
Smart LTE Module Series SC600Y&SC600T Hardware Design Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: info@quectel.com Or our local office. For more information, please visit: http://www.quectel.com/support/sales.
Smart LTE Module Series SC600Y&SC600T Hardware Design About the Document History Revision Date Author Description 1.
Smart LTE Module Series SC600Y&SC600T Hardware Design Contents About the Document ................................................................................................................................... 2 Contents ....................................................................................................................................................... 3 Table Index ........................................................................................................................
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.21.1. Design Considerations ................................................................................................... 77 3.21.2. Flashlight Interfaces ....................................................................................................... 79 3.22. Sensor Interfaces ...................................................................................................................... 80 3.23. Audio Interfaces ..................
Smart LTE Module Series SC600Y&SC600T Hardware Design 9 Storage, Manufacturing and Packaging ........................................................................................ 122 9.1. Storage .................................................................................................................................... 122 9.2. Manufacturing and Soldering .................................................................................................. 123 9.3. Packaging .......................
Smart LTE Module Series SC600Y&SC600T Hardware Design Table Index TABLE 1: SC600Y-EM*/SC600T-EM* FREQUENCY BANDS .......................................................................... 16 TABLE 2: SC600Y-NA*/SC600T-NA* FREQUENCY BANDS ........................................................................... 17 TABLE 3: SC600Y-JP*/SC600T-JP* FREQUENCY BANDS............................................................................. 17 TABLE 4: SC600Y-WF*/SC600T-WF* FREQUENCY BANDS ....................
Smart LTE Module Series SC600Y&SC600T Hardware Design TABLE 42: ANTENNA REQUIREMENTS........................................................................................................ 100 TABLE 43: ABSOLUTE MAXIMUM RATINGS ................................................................................................ 103 TABLE 44: SC600Y&SC600T MODULES POWER SUPPLY RATINGS ........................................................ 103 TABLE 45: OPERATION AND STORAGE TEMPERATURES .......................
Smart LTE Module Series SC600Y&SC600T Hardware Design Figure Index FIGURE 1: FUNCTIONAL DIAGRAM ............................................................................................................... 23 FIGURE 2: PIN ASSIGNMENT (TOP VIEW)..................................................................................................... 26 FIGURE 3: VOLTAGE DROP SAMPLE.............................................................................................................
Smart LTE Module Series SC600Y&SC600T Hardware Design FIGURE 38: REFERENCE CIRCUIT DESIGN FOR WI-FI/BT ANTENNA INTERFACE .................................. 98 FIGURE 39: REFERENCE CIRCUIT DESIGN FOR GNSS PASSIVE ANTENNA ........................................... 99 FIGURE 40: REFERENCE CIRCUIT DESIGN FOR GNSS ACTIVE ANTENNA ........................................... 100 FIGURE 41: DIMENSIONS OF THE U.FL-R-SMT CONNECTOR (UNIT: MM) ..............................................
Smart LTE Module Series SC600Y&SC600T Hardware Design OEM/Integrators Installation Manual Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.
Smart LTE Module Series SC600Y&SC600T Hardware Design In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization.
Smart LTE Module Series SC600Y&SC600T Hardware Design the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement This device complies with Industry Canada’s licence-exempt RSSs.
Smart LTE Module Series SC600Y&SC600T Hardware Design This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Smart LTE Module Series SC600Y&SC600T Hardware Design 1 Introduction This document defines the SC600Y&SC600T modules and describes their air interfaces and hardware interfaces which are connected with customers’ applications. This document can help customers quickly understand module interface specifications, electrical and mechanical details as well as other related information of SC600Y&SC600T modules.
Smart LTE Module Series SC600Y&SC600T Hardware Design 1.1. Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating SC600Y&SC600T modules. Manufacturers of the cellular terminal should send the following safety information to users and operating personnel, and incorporate these guidelines into all manuals supplied with the product.
Smart LTE Module Series SC600Y&SC600T Hardware Design 2 Product Concept 2.1. General Description SC600Y&SC600T are a series of Smart LTE modules based on Qualcomm platform and Android operating system, and provide industrial grade performance. Their general features are listed below: ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ Support worldwide LTE-FDD, LTE-TDD, DC-HSDPA, DC-HSUPA, HSPA+, HSDPA, HSUPA, WCDMA, EDGE and GPRS coverage Support short-range wireless communication via Wi-Fi 802.11a/b/g/n/ac and BT4.
Smart LTE Module Series SC600Y&SC600T Hardware Design Wi-Fi 802.11a/b/g/n/ac 2402MHz~2482MHz; 5180MHz~5825MHz BT4.2 LE 2402MHz~2480MHz GNSS GPS: 1575.42MHz±1.023MHz GLONASS: 1597.5MHz~1605.8MHz BeiDou: 1561.098MHz±2.046MHz Table 2: SC600Y-NA*/SC600T-NA* Frequency Bands Type Frequency Bands LTE-FDD B2/B4/B5/B7/B12/B13/B14/B17/B25/B26/B66/B71 LTE-TDD B41 WCDMA B2/B4/B5 TD-SCDMA / EVDO/CDMA / GSM / Wi-Fi 802.11a/b/g/n/ac 2402MHz~2482MHz; 5180MHz~5825MHz BT4.
Smart LTE Module Series SC600Y&SC600T Hardware Design Wi-Fi 802.11a/b/g/n/ac 2402MHz~2482MHz; 5180MHz~5825MHz BT4.2 LE 2402MHz~2480MHz GNSS GPS: 1575.42MHz±1.023MHz GLONASS: 1597.5MHz~1605.8MHz BeiDou: 1561.098MHz±2.046MHz Table 4: SC600Y-WF*/SC600T-WF* Frequency Bands Type Frequency Bands LTE-FDD / LTE-TDD / WCDMA / TD-SCDMA / EVDO/CDMA / GSM / Wi-Fi 802.11a/b/g/n/ac 2402MHz~2482MHz; 5180MHz~5825MHz BT4.2 LE 2402MHz~2480MHz GNSS / NOTE “*” means under development.
Smart LTE Module Series SC600Y&SC600T Hardware Design 2.2. Key Features The following table describes the detailed features of SC600Y&SC600T modules. Table 5: SC600Y&SC600T Key Features Features Details Application Processor SC600Y-XX Octa-core ARM Cortex-A53 64-bit CPU @1.8GHz ⚫ Two quad-core processors with 512KB L2 cache SC600T-XX Octa-core ARM Cortex-A53 64-bit CPU @2.
Smart LTE Module Series SC600Y&SC600T Hardware Design Support Multiuser MIMO in DL direction ⚫ Cat 6* FDD: Max 300Mbps (DL)/Max 50Mbps (UL) ⚫ Cat 6* TDD: Max 265Mbps (DL)/Max 30Mbps (UL) ⚫ Cat 4 FDD: Max 150Mbps (DL)/Max 50Mbps (UL) ⚫ Cat 4 TDD: Max 130Mbps (DL)/Max 30Mbps (UL) UMTS Features Support 3GPP R9 DC-HSDPA/DC-HSUPA/HSPA+/HSDPA/HSUPA/WCDMA Support QPSK, 16-QAM and 64-QAM modulation ⚫ DC-HSDPA: Max 42Mbps (DL) ⚫ DC-HSUPA: Max 11.
Smart LTE Module Series SC600Y&SC600T Hardware Design Video Codec SC600Y-XX Video encoding and decoding: up to 1080P @60fps Wi-Fi Video: encoding up to 1080P @30fps; decoding up to 1080P @60fps SC600T-XX Video encoding and decoding: up to 4K @30fps, up to 1080P @60fps Wi-Fi Video: encoding up to 1080P @30fps; decoding up to 1080P @60fps Audio Interfaces Audio Input Three analog microphone inputs, integrating internal bias voltage Audio Output Class AB stereo headphone output Class AB earpiece differenti
Smart LTE Module Series SC600Y&SC600T Hardware Design Charging Interface Used for battery voltage detection, fuel gauge, battery temperature detection Real Time Clock Supported Antenna Interfaces Main antenna, Rx-diversity antenna, GNSS antenna and Wi-Fi/BT antenna interfaces Physical Characteristics Size: (43.0±0.15)mm × (44.0±0.15)mm × (2.85±0.2)mm Package: LCC + LGA Weight: approx. 13.
Smart LTE Module Series SC600Y&SC600T Hardware Design 2.3. Functional Diagram The following figure shows a block diagram of SC600Y&SC600T and illustrates the major functional parts.
Smart LTE Module Series SC600Y&SC600T Hardware Design 2.4. Evaluation Board In order to help customers develop applications with SC600Y&SC600T conveniently, Quectel supplies the evaluation board, USB to RS232 converter cable, USB Type-C data cable, power adapter, earphone, antenna and other peripherals to control or test the module. For more details, please refer to document [1].
Smart LTE Module Series SC600Y&SC600T Hardware Design 3 Application Interfaces 3.1. General Description SC600Y&SC600T are equipped with 323-pin 1.0mm pitch SMT pads that can be embedded into cellular application platform. The following chapters provide the detailed description of pins/interfaces listed below.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.2. Pin Assignment The following figure shows the pin assignment of SC600Y&SC600T modules.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.3. Pin Description Table 6: I/O Parameters Definition Type Description IO Bidirectional DI Digital input DO Digital output PI Power input PO Power output AI Analog input AO Analog output OD Open drain The following tables show the SC600Y&SC600T’s pin definitions and electrical characteristics. Table 7: Pin Description Power Supply Pin Name VBAT Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design Vnorm=3.8V VRTC LDO5_1P8 LDO10_2P8 LDO6_1P8 LDO17_2P85 LDO23_1P2 LDO2_1P1 16 9 11 10 12 15 13 PI/PO PO PO PO PO PO PO Power supply for internal RTC circuit 1.8V output power supply 2.8V output power supply 1.8V output power supply 2.85V output power supply 1.2V output power supply 1.1V output power supply SC600Y&SC600T_Hardware_Design current of 1A approximately. VOmax=3.2V VI=2.0V~3.25V Vnorm=1.
Smart LTE Module Series SC600Y&SC600T Hardware Design used. If unused, keep this pin open. LDO22_2P8 14 GND 3, 4, 18, 20, 31, 34, 35, 40, 43, 47, 56, 62, 87, 98, 101, 112, 125, 128, 130, 133, 135, 148, 150, 159, 163, 170, 173, 176, 182, 193, 195, 219, 225, 243, 257~323 PO 2.8V output power supply Vnorm=2.8V IOmax=150mA Power supply for AVDD of cameras. Add a 1.0uF~4.7uF bypass capacitor if used. If unused, keep this pin open. Comment Ground Audio Interfaces Pin Name Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design MIC3_P 169 AI Microphone positive input for channel 3 EAR_P 53 AO Earpiece positive output EAR_N 52 AO Earpiece negative output SPK_P 55 AO Speaker positive output SPK_N 54 AO Speaker negative output HPH_R 51 AO Headphone right channel output HPH_REF 50 AI Headphone reference ground HPH_L 49 AO Headphone left channel output HS_DET 48 AI Headset insertion detection Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design AO configuration channel 2 USB Type-C control configuration channel 1 USBC_CC1 224 AI/ AO USB_SS_SEL 226 DO USB Type-C switch control AI Type-C/ Micro USB select control I/O Description USB_OPT 217 Float, select Type-C. Connect 1K to GND, select Micro USB. (U)SIM Interfaces Pin Name USIM1_DET USIM1_RST USIM1_CLK USIM1_DATA USIM1_VDD Pin No. 145 144 143 142 141 DC Characteristics Comment Active Low.
Smart LTE Module Series SC600Y&SC600T Hardware Design USIM2_DET USIM2_RST USIM2_CLK USIM2_DATA USIM2_VDD 256 207 208 209 210 DI (U)SIM2 card detection VILmax=0.63V VIHmin=1.17V DO (U)SIM2 card reset signal VOLmax=0.4V VOHmin= 0.8 × USIM2_VDD DO (U)SIM2 card clock signal VOLmax=0.4V VOHmin= 0.8 × USIM2_VDD (U)SIM2 card data signal VILmax= 0.2 × USIM2_VDD VIHmin= 0.7 × USIM2_VDD VOLmax=0.4V VOHmin= 0.8 × USIM2_VDD IO PO (U)SIM2 card power supply 1.8V (U)SIM: Vmax=1.85V Vmin=1.75V 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design UART4_RXD 8 DI UART4 receive data VILmax=0.63V VIHmin=1.17V UART5_RXD 198 DI UART5 receive data VILmax=0.63V VIHmin=1.17V UART5_TXD 199 DO UART5 transmit data VOLmax=0.45V VOHmin=1.35V UART5_RTS 245 DO UART5 request to send VOLmax=0.45V VOHmin=1.35V UART5_CTS 246 DI UART5 clear to send VILmax=0.63V VIHmin=1.17V I/O Description DC Characteristics SD Card Interface Pin Name SD_CLK SD_CMD SD_DATA0 SD_DATA1 SD_DATA2 Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design VOHmin=2.2V SD_DATA3 65 IO SD_DET 64 DI SD card insertion detection VILmax=0.63V VIHmin=1.17V SD_LDO11 63 PO Power supply for SD card Vnorm=2.95V IOmax=800mA SD_LDO12 179 PO 1.8V/2.95V output Vnorm=1.8V/2.95V IOmax=50mA Power supply for SD card’s pull-up circuit. Active low. TP (Touch Panel) Interfaces Pin Name Pin No. I/O Description DC Characteristics Comment TP0_RST 138 DO Reset signal of touch panel (TP0) VOLmax=0.
Smart LTE Module Series SC600Y&SC600T Hardware Design LCD_BL_K3 24 AI Current sink for LCD backlight LCD_BL_K4 25 AI Current sink for LCD backlight PMU_MPP4 152 DO PWM signal output LCD0_RST 127 DO LCD0 reset signal VOLmax=0.45V VOHmin=1.35V 1.8V power domain. Active low. LCD0_TE 126 DI LCD0 tearing effect signal VILmax=0.63V VIHmin=1.17V 1.8V power domain. LCD1_RST 113 DO LCD1 reset signal VOLmax=0.45V VOHmin=1.35V 1.8V power domain. Active low.
Smart LTE Module Series SC600Y&SC600T Hardware Design data signal (negative) DSI1_LN0_P 104 AO LCD1 MIPI lane 0 data signal (positive) DSI1_LN1_N 107 AO LCD1 MIPI lane 1 data signal (negative) DSI1_LN1_P 106 AO LCD1 MIPI lane 1 data signal (positive) DSI1_LN2_N 109 AO LCD1 MIPI lane 2 data signal (negative) DSI1_LN2_P 108 AO LCD1 MIPI lane 2 data signal (positive) DSI1_LN3_N 111 AO LCD1 MIPI lane 3 data signal (negative) DSI1_LN3_P 110 AO LCD1 MIPI lane 3 data signal (positive)
Smart LTE Module Series SC600Y&SC600T Hardware Design CSI0_LN3_N CSI0_LN3_P CSI1_CLK_N CSI1_CLK_P CSI1_LN0_N CSI1_LN0_P CSI1_LN1_N CSI1_LN1_P CSI1_LN2_N CSI1_LN2_P CSI1_LN3_N 97 96 184 183 186 185 188 187 190 189 192 AI MIPI lane 3 data signal of rear camera (negative) AI MIPI lane 3 data signal of rear camera (positive) AI MIPI clock signal of depth camera (negative) AI MIPI clock signal of depth camera (positive) AI MIPI lane 0 data signal of depth camera (negative) AI MI
Smart LTE Module Series SC600Y&SC600T Hardware Design CSI2_CLK_P CSI2_LN0_N CSI2_LN0_P CSI2_LN1_N CSI2_LN1_P CSI2_LN2_N CSI2_LN2_P CSI2_LN3_N 77 80 79 82 81 84 83 86 AI MIPI clock signal of front camera (positive) AI MIPI lane 0 data signal of front camera (negative) AI MIPI lane 0 data signal of front camera (positive) AI MIPI lane 1 data signal of front camera (negative) AI MIPI lane 1 data signal of front camera (positive) AI MIPI lane 2 data signal of front camera (negative)
Smart LTE Module Series SC600Y&SC600T Hardware Design CAM_I2C_SCL 75 OD I2C clock signal of camera 1.8V power domain. CAM_I2C_SDA 76 OD I2C data signal of camera 1.8V power domain. DCAM_MCLK 194 DO Master clock signal of depth camera VOLmax=0.45V VOHmin=1.35V CAM4_MCLK 236 DO Master clock signal of fourth camera VOLmax=0.45V VOHmin=1.35V DCAM_RST 180 DO Reset signal of depth camera VOLmax=0.45V VOHmin=1.35V DCAM_PWDN 181 DO Power down signal of depth camera VOLmax=0.
Smart LTE Module Series SC600Y&SC600T Hardware Design PMU_MPP2 151 AI General purpose ADC interface Maximum input voltage: 1.7V. I/O Description AI Differential input signal of battery voltage detection (plus) Must be connected. AI Differential input signal of battery voltage detection (minus) Must be connected. Charging Interface Pin Name BAT_PLUS BAT_MINUS Pin No. 27 28 DC Characteristics Comment Antenna Interfaces Pin Name Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design GPIO_44 254 IO GPIO GPIO_45 255 IO GPIO GPIO_66 234 IO GPIO GPIO_89 232 IO GPIO GPIO_90 231 IO GPIO GPIO_96 230 IO GPIO GPIO_97 229 IO GPIO GPIO_98 177 IO GPIO GPIO_99 178 IO GPIO GPIO_105 242 IO GRFC1 GPIO_107 241 IO GRFC2 Pin Name Pin No. I/O Description SPI_CS 58 DO Chip selection signal of SPI interface Can be multiplexed into UART6_CTS.
Smart LTE Module Series SC600Y&SC600T Hardware Design (negative) VIB_DRV 161 AO Vibrator drive (positive) negative terminal of vibrator. Connected to the positive terminal of vibrator. Flashlight Interfaces Pin Name Pin No. I/O Description FLASH_LED1 26 AO Flash/torch current driver output FLASH_LED2 162 AO Flash/torch current driver output DC Characteristics Comment Support flash and torch modes. Emergency Download Interface Pin Name Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design Pin Name Pin No. RESERVED 154, 155, 156, 157, 158, 164, 165, 166, 212, 213, 214, 218, 222, 235, 239, 240, I/O Description DC Characteristics Comment Keep these pins open. Reserved pins 3.4. Power Supply 3.4.1. Power Supply Pins SC600Y&SC600T provide 3 VBAT pins , 2 VDD_RF pins and 2 VPH_PWR pins. VBAT pins are dedicated for connection with an external power supply.
Smart LTE Module Series SC600Y&SC600T Hardware Design To decrease voltage drop, a bypass capacitor of about 100µF with low ESR (ESR=0.7Ω) should be used, and a multi-layer ceramic chip capacitor (MLCC) array should also be reserved due to its ultra-low ESR. It is recommended to use three ceramic capacitors (100nF, 33pF, 10pF) for composing the MLCC array, and place these capacitors close to VBAT/VDD_RF/VPH_PWR pins. The width of VBAT trace should be no less than 3mm.
Smart LTE Module Series SC600Y&SC600T Hardware Design U1 MIC29502WU DC_IN VBAT OUT 4 470uF ADJ 5 100nF 51K GND R1 3 C2 1 C1 EN 2 IN R2 100K 1% R3 47K 1% R4 470R C3 C4 470uF 100nF Figure 5: Reference Circuit of Power Supply NOTES 1. 2. 3. It is recommended to switch off the power supply for module in abnormal state, and then switch on the power to restart the module. The module supports battery charging function by default.
Smart LTE Module Series SC600Y&SC600T Hardware Design PWRKEY R3 1K >1.6s R1 Turn on pulse Q1 4.7K R2 47K Figure 6: Turn on the Module Using Driving Circuit Another way to control the PWRKEY is using a button directly. A TVS component is indispensable to be placed nearby the button for ESD protection. A reference circuit is shown in the following figure.
Smart LTE Module Series SC600Y&SC600T Hardware Design The turning on scenario is illustrated in the following figure. VBA T(Typ.:3.8V) Note2 PWRKEY >1.6s 61.2ms LDO5_1P8 Software controlled Software controlled LDO6_1P8 LDO10_2P8 LDO17_2P85 38s Others Acti ve Figure 8: Timing of Turning on Module NOTES 1. 2. The turn-on timing might be different from the above figure when the module powers on for the first time. Make sure that VBAT is stable before pulling down PWRKEY pin.
Smart LTE Module Series SC600Y&SC600T Hardware Design VBAT > 8s PWRKEY Others Power down Figure 9: Timing of Turning off Module 3.6. VRTC Interface The RTC (Real Time Clock) can be powered by an external power source through VRTC when the module is powered down and there is no power supply for the VBAT. The external power source can be rechargeable battery (such as coil cells) according to application demands. The following reference circuit design when an external battery is utilized for powering RTC.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.7. Power Output SC600Y&SC600T support output of regulated voltages for peripheral circuits. During application, it is recommended to use parallel capacitors (33pF and 10pF) in the circuit to suppress high frequency noise. Table 8: Power Description Pin Name Default Voltage (V) Drive Current (mA) Idle LDO5_1P8 1.8 20 Keep LDO6_1P8 1.8 300 / LDO10_2P8 2.8 150 / LDO17_2P85 2.85 300 / LDO2_1P1 1.1 1200 / LDO22_2P8 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design ⚫ ⚫ pre-charge mode. The charging current is 450mA (100mA~450mA programmable, 450mA by default). Constant current mode (CC mode): When the battery voltage is increased to between the maximum pre-charge voltage and 4.2V (3.6V~4.5V programmable, 4.2V by default), the system will switch to CC mode. The charging current is programmable from 300mA~3000mA. The default charging current is 500mA for USB charging and 2A for adapter.
Smart LTE Module Series SC600Y&SC600T Hardware Design Adapter or USB R1 VBAT USB _VBUS VBAT 0R 0805 BAT_PLUS NTC BAT_THERM GND BAT_MINUS Battery D1 D2 ESD ESD C1 C2 100uF 1uF C3 33pF GND Module Figure 11: Reference Design for Battery Charging Circuit SC600Y&SC600T offer a fuel gauge algorithm that is able to accurately estimate the battery’s state by current and voltage monitor techniques.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 10: Pin Definition of USB Interface Pin Name Pin No. I/O Description Comment Vmax=10V Vmin=4.0V Vnorm=5.0V USB_VBUS 41, 42 PI/PO Charging power input; Power supply output for OTG device; USB/charger insertion detection. USB_DM 33 IO USB 2.0 USB differential data bus (minus) USB_DP 32 IO USB 2.0 USB differential data bus (plus) USB_ID 30 AI USB ID detection USB_SS_RX_P 171 AI USB 3.
Smart LTE Module Series SC600Y&SC600T Hardware Design D2 D3 ESD ESD 1K 6 Module D1 100nF ESD VUSB USB_DM USB_DP USB_ID GND GND GND C1 R1 1 2 3 4 5 7 USB_VUSB USB_DM USB_DP USB_ID USB_OPT 9 GND 8 GND The following is a reference design for USB interface: Figure 12: Micro USB Interface Reference Design Module USB 3.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 11: USB Trace Length Inside the Module Pin No. Signal Length (mm) 33 USB_DM 39.52 32 USB_DP 39.07 171 USB_SS_RX_P 28.55 172 USB_SS_RX_M 28.23 174 USB_SS_TX_P 19.58 175 USB_SS_TX_M 19.35 Length Difference (DP-DM) -0.45 0.32 0.23 3.10. UART Interfaces The module provides the following four UART interfaces: ⚫ ⚫ ⚫ ⚫ UART5: 4-wire UART interface, hardware flow control supported, 1.
Smart LTE Module Series SC600Y&SC600T Hardware Design UART5_RTS 245 DO UART5 request to send SPI_MISO 61 DI UART6 receive data SPI interface pin by default. Can be multiplexed into UART6_RXD. SPI_MOSI 60 DO UART6 transmit data SPI interface pin by default. Can be multiplexed into UART6_TXD. UART6 clear to send SPI interface pin by default. Can be multiplexed into UART6_CTS. UART6 request to send SPI interface pin by default. Can be multiplexed into UART6_RTS.
Smart LTE Module Series SC600Y&SC600T Hardware Design 1.8V OE VCCA UART5_TXD TXD_1.8V RTS_1.8V UART5_RTS 3.3V VCCB TXD_3.3V RTS_3.3V UART5_RXD RXD_1.8V RXD_3.3V UART5_CTS CTS_1.8V CTS_3.3V GND RXD CTS DIN 3 DOUT3 DIN 4 DOUT4 DIN 5 DOUT5 FORCEON 3.
Smart LTE Module Series SC600Y&SC600T Hardware Design USIM1_CLK 143 DO (U)SIM1 card clock signal USIM1_DATA 142 IO (U)SIM1 card data signal Pull up to USIM1_VDD with a 10K resistor. USIM1_VDD 141 PO (U)SIM1 card power supply Either 1.8V or 2.95V (U)SIM card is supported. Active low. Need external pull-up to 1.8V. If unused, keep this pin open. Disabled by default, and can be enabled through software configuration.
Smart LTE Module Series SC600Y&SC600T Hardware Design USIM _VDD R1 10K Module USIM_ VDD USIM_ RST USIM_ CLK USIM_ DET C1 (U)SIM Card Connector 100nF VCC RST CLK R2 22R R3 GND VPP IO 22R USIM_ DATA R4 22R C2 C3 C4 22pF 22pF 22pF D1 ESD Figure 17: Reference Circuit for (U)SIM Interface with a 6-pin (U)SIM Card Connector In order to ensure good performance and avoid damage of (U)SIM cards, please follow the criteria below in (U)SIM circuit design: ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ Keep placement of (U)SIM card co
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 14: Pin Definition of SD Card Interface Pin Name Pin No. I/O Description Comment SD_LDO11 63 PO Power supply for SD card Vnorm=2.95V IOmax=800mA SD_LDO12 179 PO SD card pull-up power supply Support 1.8V or 2.95V power supply. The maximum drive current is 50mA.
Smart LTE Module Series SC600Y&SC600T Hardware Design CMD, CLK, DATA0, DATA1, DATA2 and DATA3 are all high speed signal lines. In PCB design, please control the characteristic impedance of them as 50Ω, and do not cross them with other traces. It is recommended to route the trace on the inner layer of PCB, and keep the same trace length for CLK, CMD, DATA0, DATA1, DATA2 and DATA3. CLK additionally needs ground shielding. Layout guidelines: ⚫ ⚫ Control impedance as 50Ω±10%, and ground shielding is required.
Smart LTE Module Series SC600Y&SC600T Hardware Design UART2_TXD 5 GPIO_4 B-PD:nppukp UART2_RXD 6 GPIO_5 B-PD:nppukp TP1_I2C_SDA 204 GPIO_6 B-PD:nppukp TP1_I2C_SCL 205 GPIO_7 B-PD:nppukp TP1_RST 136 GPIO_8 B-PD:nppukp TP1_INT 137 GPIO_9 B-PD:nppukp TP0_I2C_SDA 206 GPIO_10 B-PD:nppukp TP0_I2C_SCL 140 GPIO_11 B-PD:nppukp UART4_TXD 7 GPIO_12 B-PD:nppukp UART4_RXD 8 GPIO_13 B-PD:nppukp SENSOR_I2C_SDA 132 GPIO_14 B-PD:nppukp SENSOR_I2C_SCL 131 GPIO_15 B-PD:nppukp U
Smart LTE Module Series SC600Y&SC600T Hardware Design DCAM_I2C_SDA 197 GPIO_31 B-PD:nppukp DCAM_I2C_SCL 196 GPIO_32 B-PD:nppukp GPIO_33 238 GPIO_33 B-PD:nppukp GPIO_36 237 GPIO_36 B-PD:nppukp MCAM_PWDN 73 GPIO_39 B-PD:nppukp MCAM_RST 74 GPIO_40 B-PD:nppukp GPIO_42 252 GPIO_42 B-PD:nppukp Wakeup GPIO_43 253 GPIO_43 B-PD:nppukp Wakeup GPIO_44 254 GPIO_44 B-PD:nppukp Wakeup GPIO_45 255 GPIO_45 B-PD:nppukp Wakeup LCD0_RST 127 GPIO_61 B-PD:nppukp TP0_RST 138 GPI
Smart LTE Module Series SC600Y&SC600T Hardware Design DCAM_RST 180 GPIO_131 B-PD:nppukp Wakeup DCAM_PWDN 3) 181 GPIO_132 B-PD:nppukp Wakeup SD_DET 64 GPIO_133 B-PD:nppukp Wakeup FP_SPI_CLK 250 GPIO_135 B-PD:nppukp FP_SPI_CS 203 GPIO_136 B-PD:nppukp FP_SPI_MOSI 249 GPIO_137 B-PD:nppukp Wakeup FP_SPI_MISO 251 GPIO_138 B-PD:nppukp Wakeup USB_SS_SEL 226 GPIO_139 B-PD:nppukp Wakeup NOTES 1. 2. 3. 4.
Smart LTE Module Series SC600Y&SC600T Hardware Design CAM_I2C_SCL 75 OD I2C clock signal of camera CAM_I2C_SDA 76 OD I2C data signal of camera DCAM_I2C_SCL 196 OD I2C clock signal of depth camera DCAM_I2C_SDA 197 OD I2C data signal of depth camera SENSOR_I2C_SCL 131 OD I2C clock signal for external sensor SENSOR_I2C_SDA 132 OD I2C data signal for external sensor Used for cameras Used for depth cameras Used for external sensors 3.15.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 19: Pin Definition of SPI Interfaces Pin Name Pin No I/O Description Comment SPI_CS 58 DO Chip selection signal of SPI interface Can be multiplexed into UART6_CST. SPI_CLK 59 DO Clock signal of SPI interface Can be multiplexed into UART6_RTS. SPI_MOSI 60 DO Master out slave in of SPI interface Can be multiplexed into UART6_TXD. SPI_MISO 61 DI Master in salve out of SPI interface Can be multiplexed into UART6_RXD.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 21: Pin Definition of Vibrator Drive Interface Pin Name Pin No I/O Description Comment VIB_GND 160 AI Vibrator GND (negative) Connected to the negative terminal of avibrator. VIB_DRV 161 AO Vibrator drive (positive) Connected to the positive terminal of vibrator. The Vibrator is driven by an exclusive circuit, and a reference circuit design is shown below.
Smart LTE Module Series SC600Y&SC600T Hardware Design LCD_BL_A 21 PO Current output for LCD backlight LCD_BL_K1 22 AI Current sink for LCD backlight LCD_BL_K2 23 AI Current sink for LCD backlight LCD_BL_K3 24 AI Current sink for LCD backlight LCD_BL_K4 25 AI Current sink for LCD backlight LCD0_RST 127 DO LCD0 reset signal LCD0_TE 126 DI LCD0 tearing effect signal LCD1_RST 113 DO LCD1 reset signal LCD1_TE 114 DI LCD1 tearing effect signal DSI0_CLK_N 116 AO LCD0 MIPI cl
Smart LTE Module Series SC600Y&SC600T Hardware Design signal (negative) DSI1_LN0_P 104 AO LCD1 MIPI lane 0 data signal (positive) DSI1_LN1_N 107 AO LCD1 MIPI lane 1 data signal (negative) DSI1_LN1_P 106 AO LCD1 MIPI lane 1 data signal (positive) DSI1_LN2_N 109 AO LCD1 MIPI lane 2 data signal (negative) DSI1_LN2_P 108 AO LCD1 MIPI lane 2 data signal (positive) DSI1_LN3_N 111 AO LCD1 MIPI lane 3 data signal (negative) DSI1_LN3_P 110 AO LCD1 MIPI lane 3 data signal (positive) The f
Smart LTE Module Series SC600Y&SC600T Hardware Design LDO17_2P 85 LDO6_1P8 1 2 3 4 5 6 LCM1_LED+ LCM1_LEDLCD1_TE LCD1_RST PMU_MPP2 3 5 6 4 6 2 DSI1_LN3_N 5 1 DSI1_LN3_P 4 1 DSI1_LN2_P 2 DSI1_LN2_N 1 6 2 DSI1_LN1_N 3 5 DSI1_LN1_P 6 2 5 1 DSI1_LN0_P DSI1_LN0_N 1 6 2 DSI1_CLK_N C2 100nF C3 1 uF FL1 FL2 FL3 4 3 FL4 4 3 5 DSI1_CLK_P 3 C1 4.
Smart LTE Module Series SC600Y&SC600T Hardware Design ⚫ ⚫ Power two strings of WLEDs (about 16 WLEDs) with two current sink drivers, or power four strings of WLEDs (about 28 WLEDs) with four current sink drivers. The frequency of PWM can be configured by software to adjust the backlight brightness. LCM0 uses the internal backlight driving circuit provided by SC600Y&SC600T by default. LCM1 can use the internal circuit or an external backlight driving circuit according to customers’ demands.
Smart LTE Module Series SC600Y&SC600T Hardware Design TP0_I2C_ SDA 206 OD I2C data signal of touch panel (TP0) TP1_INT 137 DI Interrupt signal of touch panel (TP1) TP1_RST 136 DO Reset signal of touch panel (TP1) TP1_I2C_ SCL 205 OD I2C clock signal of touch panel (TP1) TP1_I2C_ SDA 204 OD I2C data signal of touch panel (TP1) Active low A reference design for touch panel interfaces is shown below. LDO 6_1P8 R1 LDO10_2P8 R2 2.2K 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 24: Pin Definition of Camera Interfaces Pin Name LDO2_1P1 Pin No. 13 I/O Description Comment PO 1.1V output power supply for digital core circuit of rear camera Vnorm=1.1V IOmax=1200mA Vnorm=1.8V IOmax=300mA LDO6_1P8 10 PO 1.8V output power supply for digital I/O circuit of camera LDO17_2P85 12 PO 2.85V output power supply auto focus circuit Vnorm=2.85V IOmax=300mA LDO22_2P8 14 PO 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design CSI1_LN0_P 185 AI MIPI lane 0 data signal of depth camera (positive) CSI1_LN1_N 188 AI MIPI lane 1 data signal of depth camera (negative) CSI1_LN1_P 187 AI MIPI lane 1 data signal of depth camera (positive) AI MIPI lane 2 data signal of depth camera (negative) Can be multiplexed into differential data of the fourth camera (negative) AI MIPI lane 2 data signal of depth camera (positive) Can be multiplexed into differential data of the fo
Smart LTE Module Series SC600Y&SC600T Hardware Design MCAM_RST 74 DO Reset signal of rear camera MCAM_PWDN 73 DO Power down signal of rear camera SCAM_RST 72 DO Reset signal of front camera SCAM_PWDN 71 DO Power down signal of front camera CAM_I2C_SCL 75 OD I2C clock signal of camera CAM_I2C_SDA 76 OD I2C data signal of camera DCAM_MCLK 194 DO Clock signal of depth camera CAM4_MCLK 236 DO Master clock signal of fourth camera DCAM_RST 180 DO Reset signal of depth camera D
Smart LTE Module Series SC600Y&SC600T Hardware Design The following is a reference circuit design for two-camera applications. 4.7uF 4.7uF 1uF 1uF AF_VDD LDO22_2P8 AVDD LDO2_1P1 DVDD SCAM_RST SCAM_PWDN SCAM_MCLK CSI2_LN3_P CSI2_LN3_N CSI2_LN2_P CSI2_LN2_N CSI2_LN1_P CSI2_LN1_N CSI2_LN0_P CSI2_LN0_N CSI2_ CLK_P CSI2_ CLK_N DOVDD LDO 6_1P8 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design The following is a reference circuit design for three-camera applications. AVDD DOVDD EMI EMI EMI EMI EMI 1uF DOVDD AVDD 4.7 uF LDO23_1P2 EMI CSI2_LN0_N CSI2_LN1_P CSI2_LN1_N EMI DVDD Front camera connector 1uF CSI2_LN0_P EMI 4.7 uF 1uF EMI EMI 2.2K 2.2K Depth camera connector CSI1_LN0_P CSI1_LN0_N CSI1_CLK_P CSI1_CLK_N DCAM_RST DCAM_PWDN DCAM_MCLK DCAM_I2C_SDA _ DCAM_I2C_SCL 2.2K 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.21.1. Design Considerations ⚫ ⚫ ⚫ ⚫ Special attention should be paid to the pin definition of LCM/camera connectors. Assure the SC600Y&SC600T and the connectors are correctly connected. MIPI are high speed signal lines, supporting maximum data rate up to 2.1Gbps. The differential impedance should be controlled as 100Ω. Additionally, it is recommended to route the trace on the inner layer of PCB, and do not cross it with other traces.
Smart LTE Module Series SC600Y&SC600T Hardware Design 105 DSI1_LN0_N 10.27 -0.11 104 DSI1_LN0_P 10.16 107 DSI1_LN1_N 11.75 106 DSI1_LN1_P 11.58 109 DSI1_LN2_N 14.86 -0.17 -0.36 108 DSI1_LN2_P 14.5 111 DSI1_LN3_N 15.73 110 DSI1_LN3_P 15.88 89 CSI0_CLK_N 16.54 88 CSI0_CLK_P 16.57 91 CSI0_LN0_N 17.47 90 CSI0_LN0_P 17.4 93 CSI0_LN1_N 12.13 92 CSI0_LN1_P 12.08 95 CSI0_LN2_N 9.56 94 CSI0_LN2_P 9.7 97 CSI0_LN3_N 8.73 96 CSI0_LN3_P 8.86 184 CSI1_CLK_N 20.
Smart LTE Module Series SC600Y&SC600T Hardware Design 192 CSI1_LN3_N 10.49 -0.43 191 CSI1_LN3_P 10.06 78 CSI2_CLK_N 22.00 77 CSI2_CLK_P 22.17 80 CSI2_LN0_N 22.07 0.17 -0.07 79 CSI2_LN0_P 22.00 82 CSI2_LN1_N 22.54 81 CSI2_LN1_P 22.05 84 CSI2_LN2_N 22.03 83 CSI2_LN2_P 21.92 86 CSI2_LN3_N 21.90 85 CSI2_LN3_P 22.49 -0.49 -0.11 0.59 3.21.2. Flashlight Interfaces SC600Y&SC600T modules support 2 flash LED drivers, with maximal output current up to 1.
Smart LTE Module Series SC600Y&SC600T Hardware Design A reference circuit design is shown below. D1 FLASH_LED1 D2 FLASH_LED2 Module Figure 26: Reference Circuit Design for Flashlight Interfaces 3.22. Sensor Interfaces SC600Y&SC600T modules support communication with sensors via I2C interface, and it supports various sensors such as acceleration sensor, gyroscopic sensor, compass, optical sensor, temperature sensor. Table 27: Pin Definition of Sensor Interfaces Pin Name Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 28: Pin Definition of Audio Interfaces Pin Name Pin No. I/O Description MIC1_P 44 AI Microphone positive input for channel 1 MIC1_N 45 AI Microphone negative input for channel 1 MIC_GND 168 MIC2_P 46 AI Microphone positive input for headset.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.23.1.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.23.2. Reference Circuit Design for Earpiece Interface C2 33pF R1 EAR_P C1 0R 33pF R2 EAR_N 0R D1 C3 D2 33pF Module Figure 29: Reference Circuit Design for Earpiece Interface 3.23.3.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.23.4. Reference Circuit Design for Loudspeaker Interface F1 SPK_P EARP F2 EA SPK_N RN C1 C2 33pF 33pF D1 D2 Module Figure 31: Reference Circuit Design for Loudspeaker Interface 3.23.5. Audio Interfaces Design Considerations It is recommended to use the electret microphone with dual built-in capacitors (e.g. 10pF and 33pF) for filtering out RF interference, thus reducing TDD noise.
Smart LTE Module Series SC600Y&SC600T Hardware Design 3.24. Emergency Download Interface USB_BOOT is an emergency download interface. Pull up to LDO5_1P8 during power-up will force the module enter into emergency download mode. This is an emergency option when there are failures such as abnormal startup or operation. For convenient firmware upgrade and debugging in the future, please reverse the reference circuit design shown as below.
Smart LTE Module Series SC600Y&SC600T Hardware Design 4 Wi-Fi and BT SC600Y&SC600T modules provide a shared antenna interface ANT_WIFI/BT for Wi-Fi and Bluetooth (BT) functions. The interface impedance is 50Ω. External antennas such as PCB antenna, sucker antenna and ceramic antenna can be connected to the module via the interface, so as to achieve Wi-Fi and BT functions. 4.1. Wi-Fi Overview SC600Y&SC600T modules support 2.4GHz and 5GHz dual-band WLAN wireless communication based on IEEE 802.
Smart LTE Module Series SC600Y&SC600T Hardware Design 802.11g 54Mbps 14dBm±2.5dB 802.11n HT20 MCS0 15dBm±2.5dB 802.11n HT20 MCS7 13dBm±2.5dB 802.11n HT40 MCS0 14dBm±2.5dB 802.11n HT40 MCS7 13dBm±2.5dB 802.11a 6Mbps 14dBm±2.5dB 802.11a 54Mbps 13dBm±2.5dB 802.11n HT20 MCS0 15dBm±2.5dB 802.11n HT20 MCS7 13dBm±2.5dB 802.11n HT40 MCS0 15dBm±2.5dB 802.11n HT40 MCS7 13dBm±2.5dB 802.11ac VHT20 MCS0 15dBm±2.5dB 802.11ac VHT20 MCS8 13dBm±2.5dB 802.11ac VHT40 MCS0 14dBm±2.
Smart LTE Module Series SC600Y&SC600T Hardware Design 5GHz 802.11n HT20 MCS7 -70 802.11n HT40 MCS0 -85 802.11n HT40 MCS7 -67 802.11a 6Mbps -90 802.11a 54Mbps -71.5 802.11n HT20 MCS0 -86dBm 802.11n HT20 MCS7 -67dBm 802.11n HT40 MCS0 -84dBm 802.11n HT40 MCS7 -64dBm 802.11ac VHT20 MCS8 -68dBm 802.11ac VHT40 MCS9 -62dBm 802.11ac VHT80 MCS9 -58dBm Reference specifications are listed below: ⚫ ⚫ IEEE 802.11n WLAN MAC and PHY, October 2009 + IEEE 802.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 31: BT Data Rate and Versions Version Data rate Maximum Application 1.2 1Mbit/s > 80Kbit/s 2.0+EDR 3Mbit/s > 80Kbit/s 3.0+HS 24Mbit/s Reference to 3.0+HS 4.0 24Mbit/s Reference to 4.0 LE Throughput Comment Reference specifications are listed below: ⚫ ⚫ Bluetooth Radio Frequency TSS and TP Specification 1.2/2.0/2.0 + EDR/2.1/2.1+ EDR/3.0/3.0 + HS, August 6, 2009 Bluetooth Low Energy RF PHY Test Specification, RF-PHY.TS/4.0.
Smart LTE Module Series SC600Y&SC600T Hardware Design 5 GNSS SC600Y&SC600T modules integrate a Qualcomm IZat™ GNSS engine (Gen 8C) which supports multiple positioning and navigation systems including GPS, GLONASS and BeiDou. With an embedded LNA, the module provides greatly improved positioning accuracy. 5.1. GNSS Performance The following table lists the GNSS performance of SC600Y&SC600T modules in conduction mode.
Smart LTE Module Series SC600Y&SC600T Hardware Design 5.2. GNSS RF Design Guidelines Bad design of antenna and layout may cause reduced GNSS receiving sensitivity, longer GNSS positioning time, or reduced positioning accuracy. In order to avoid these, please follow the design rules listed below: ⚫ ⚫ ⚫ ⚫ ⚫ Maximize the distance between the GNSS RF part and the GPRS RF part (including trace routing and antenna layout) to avoid mutual interference.
Smart LTE Module Series SC600Y&SC600T Hardware Design 6 Antenna Interfaces SC600Y&SC600T provide four antenna interfaces for main antenna, Rx-diversity/MIMO antenna, GNSS antenna, and Wi-Fi/BT antenna, respectively. The antenna ports have an impedance of 50Ω. 6.1. Main/Rx-diversity Antenna Interfaces The pin definition of main/Rx-diversity antenna interfaces is shown below. Table 34: Pin Definition of Main/Rx-diversity Antenna Interfaces Pin Name Pin No.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B8 925~960 880~915 MHz LTE-FDD B11 1475.9~495.9 1427.9~1447.9 MHz LTE-FDD B18 860~875 815~830 MHz LTE-FDD B19 875~890 830~845 MHz LTE-TDD B21 1495.9~1510.9 1447.9~1462.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B5 869~894 824~849 MHz LTE-FDD B7 2620~2690 2500~2570 MHz LTE-FDD B8 925~960 880~915 MHz LTE-FDD B20 791~821 832~862 MHz LTE-FDD B28A 758~788 703~733 MHz LTE-FDD B28B 773~803 718~748 MHz LTE-TDD B38 2570~2620 2570~2620 MHz LTE-TDD B39 1880~1920 1880~1920 MHz LTE-TDD B40 2300~2400 2300~2400 MHz LTE-TDD B41 1) 2496~2690 2496~2690 MHz Table 37: SC600Y-NA*/SC600T-NA* Module Operating Frequencies 3GPP Band Rec
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B26 859~894 814~849 MHz LTE-FDD B66 2110~2200 1710~1780 MHz LTE-FDD B71 617 – 652 663 – 698 MHz LTE-TDD B41 1) 2496~2690 2496~2690 MHz NOTES 1. 1) The bandwidth of LTE-TDD B41 for SC600Y-EM*/SC600T-EM*、SC600Y-JP*/SC600T-JP*、 SC600Y-NA*/SC600T-NA* is 200MHz (2496MHz~2690MHz), and the corresponding channel ranges from 39650 to 41589. 6.1.1.
Smart LTE Module Series SC600Y&SC600T Hardware Design 6.1.2. Reference Design of RF Layout For user’s PCB, the characteristic impedance of all RF traces should be controlled to 50Ω. The impedance of the RF traces is usually determined by the trace width (W), the materials’ dielectric constant, the height from the reference ground to the signal layer (H), and the clearance between RF traces and grounds (S). Microstrip or coplanar waveguide is typically used in RF layout to control characteristic impedance.
Smart LTE Module Series SC600Y&SC600T Hardware Design Figure 36: Coplanar Waveguide Design on a 4-layer PCB (Layer 3 as Reference Ground) Figure 37: Coplanar Waveguide Design on a 4-layer PCB (Layer 4 as Reference Ground) In order to ensure RF performance and reliability, the following principles should be complied with in RF layout design: ⚫ ⚫ ⚫ ⚫ ⚫ Use an impedance simulation tool to accurately control the characteristic impedance of RF traces to 50Ω.
Smart LTE Module Series SC600Y&SC600T Hardware Design For more details about RF layout, please refer to document [3]. 6.2. Wi-Fi/BT Antenna Interface The pin definition of Wi-Fi/BT antenna interfaces and operating frequencies is shown below. Table 38: Pin Definition of Wi-Fi/BT Antenna Interface Pin Name Pin No. I/O Description Comment ANT_WIFI/BT 129 IO Wi-Fi/BT antenna interface 50Ω impedance Table 39: Wi-Fi/BT Frequency Type Frequency Unit 802.11a/b/g/n/ac 2402~2482 5180~5825 MHz BT4.
Smart LTE Module Series SC600Y&SC600T Hardware Design 6.3. GNSS Antenna Interface The pin definition of GNSS antenna interfaces and operating frequencies is shown below. Table 40: Pin Definition of GNSS Antenna Pin Name Pin No. I/O Description Comment ANT_GNSS 134 AI GNSS antenna Interface 50Ω impedance GNSS_LNA_EN 202 DO LNA enable control For test purpose only. If unused, keep it open. Table 41: GNSS Frequency Type Frequency Unit GPS 1575.42±1.023 MHz GLONASS 1597.5~1605.
Smart LTE Module Series SC600Y&SC600T Hardware Design 6.3.2. Recommended Circuit for Active Antenna The active antenna is powered by a 56nH inductor through the antenna's signal path. The common power supply voltage ranges from 3.3V to 5.0V. Although featuring low power consumption, the active antenna still requires stable and clean power supplies. It is recommended to use high performance LDO as the power supply. A reference design of GNSS active antenna is shown below.
Smart LTE Module Series SC600Y&SC600T Hardware Design Cable Insertion Loss: <2dB (LTE-FDD B7, LTE-TDD B38/B40/B41) Wi-Fi/BT VSWR: ≤2 Gain (dBi): 1 Max Input Power (W): 50 Input Impedance (Ω): 50 Polarization Type: Vertical Cable Insertion Loss: <1dB GNSS 1) Frequency range: 1559MHz~1609MHz Polarization: RHCP or linear VSWR: <2 (Typ.) Passive Antenna Gain: >0dBi Active Antenna Noise Figure: <1.5dB (Typ.) Active Antenna Gain: >-2dBi Active Antenna Embedded LNA Gain: <17dB (Typ.
Smart LTE Module Series SC600Y&SC600T Hardware Design U.FL-LP serial connectors listed in the following figure can be used to match the U.FL-R-SMT. Figure 42: Mechanicals of U.FL-LP Connectors The following figure describes the space factor of mated connector. Figure 43: Space Factor of Mated Connector (Unit: mm) For more details, please visit http://www.hirose.com.
Smart LTE Module Series SC600Y&SC600T Hardware Design 7 Electrical, Reliability and Radio Characteristics 7.1. Absolute Maximum Ratings Absolute maximum ratings for power supply and voltage on digital and analog pins of the module are listed in the following table. Table 43: Absolute Maximum Ratings Parameter Min Max Unit VBAT -0.5 6 V USB_VBUS -0.5 16 V 0 3 A 2.3 V Current on VBAT Voltage on Digital Pins -0.3 7.2.
Smart LTE Module Series SC600Y&SC600T Hardware Design Parameter Description Conditions Min IVBAT Peak supply current (during transmission slot) Maximum power control level at EGSM900 USB_VBUS VRTC Power supply voltage of backup battery. Typ. Max Unit 1.8 3.0 A 4.0 5.0 10 V 2.0 3.0 3.25 V 7.3. Operation and Storage Temperatures The operation and storage temperatures are listed in the following table. Table 45: Operation and Storage Temperatures Parameter Min Typ.
Smart LTE Module Series SC600Y&SC600T Hardware Design 7.4. Current Consumption The current consumption of different conditions is listed in the following table. Table 46: SC600Y-JP*/SC600T-JP* Current Consumption OFF state WCDMA supply current LTE-FDD supply current LTE-TDD supply current IVBAT Power down 80 uA Sleep (USB disconnected) @DRX=6 4.568 mA Sleep (USB disconnected) @DRX=8 3.093 mA Sleep (USB disconnected) @DRX=9 2.995 mA Sleep (USB disconnected) @DRX=6 4.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B1 @max power 535 mA LTE-FDD B3 @max power 590 mA LTE-FDD B5 @max power 505 mA LTE-FDD B8 @max power 520 mA LTE-TDD B11 @max power 512 mA LTE-TDD B18 @max power 555 mA LTE-TDD B19 @max power 500 mA LTE-TDD B21 @max power 520 mA LTE-TDD B26 @max power 530 mA LTE-TDD B28A @max power 640 mA LTE-TDD B28B @max power 585 mA LTE-TDD B41 @max power 490 mA LTE data transfer Table 47: SC600Y-EM*/SC600T-EM* Current Cons
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-TDD supply current Sleep (USB disconnected) @DRX=8 2.959 mA Sleep (USB disconnected) @DRX=6 4.273 mA Sleep (USB disconnected) @DRX=8 3.
Smart LTE Module Series SC600Y&SC600T Hardware Design EGSM900 (2UL/3DL) @PCL 5 TBD mA EGSM900 (3UL/2DL) @PCL 5 TBD mA EGSM900 (4UL/1DL) @PCL 5 TBD mA DCS1800 (1UL/4DL) @PCL 0 TBD mA DCS1800 (2UL/3DL) @PCL 0 TBD mA DCS1800 (3UL/2DL) @PCL 0 TBD mA DCS1800 (4UL/1DL) @PCL 0 TBD mA PCS1900 (1UL/4DL) @PCL 0 TBD mA PCS1900 (2UL/3DL) @PCL 0 TBD mA PCS1900 (3UL/2DL) @PCL 0 TBD mA PCS1900 (4UL/1DL) @PCL 0 TBD mA GSM850 (1UL/4DL) @PCL 8 TBD mA GSM850 (2UL/3DL) @PCL 8 TBD mA GSM8
Smart LTE Module Series SC600Y&SC600T Hardware Design WCDMA data transfer LTE data transfer PCS1900 (3UL/2DL) @PCL 2 TBD mA PCS1900 (4UL/1DL) @PCL 2 TBD mA B1 (HSDPA) @max power 540 mA B2 (HSDPA) @max power 480 mA B4 (HSDPA) @max power 470 mA B5 (HSDPA) @max power 490 mA B8 (HSDPA) @max power 470 mA B1 (HSUPA) @max power 560 mA B2 (HSUPA) @max power 490 mA B4 (HSUPA) @max power 480 mA B5 (HSUPA) @max power 505 mA B8 (HSUPA) @max power 480 mA LTE-FDD B1 @max power 670
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-TDD B41 @max power mA 450 Table 48: SC600Y-NA*/SC600T-NA* Current Consumption Parameter Description Conditions OFF state Power down 80 uA Sleep (USB disconnected) @DRX=6 3.724 mA Sleep (USB disconnected) @DRX=8 3.076 mA Sleep (USB disconnected) @DRX=9 2.603 mA Sleep (USB disconnected) @DRX=6 3.835 mA Sleep (USB disconnected) @DRX=8 2.998 mA Sleep (USB disconnected) @DRX=6 4.192 mA Sleep (USB disconnected) @DRX=8 2.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B5 @max power 550 mA LTE-FDD B7 @max power 780 mA LTE-FDD B12 @max power 520 mA LTE-FDD B13 @max power 560 mA LTE-TDD B14 @max power 500 mA LTE-TDD B17 @max power 470 mA LTE-TDD B25 @max power 670 mA LTE-TDD B26 @max power 560 mA LTE-TDD B66 @max power 650 mA LTE-TDD B71 @max power 580 mA LTE-TDD B41 @max power 370 mA 7.5. RF Output Power The following table shows the RF output power of SC600Y&SC600T modules.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B11 23dBm±2dB <-39dBm LTE-FDD B18 23dBm±2dB <-39dBm LTE-FDD B19 23dBm±2dB <-39dBm LTE-FDD B21 23dBm±2dB <-39dBm LTE-FDD B26 23dBm±2dB <-39dBm LTE-FDD B28A 23dBm±2dB <-39dBm LTE-TDD B28B 23dBm±2dB <-39dBm LTE-TDD B41 23dBm±2dB <-39dBm Table 50: SC600Y-EM*/SC600T-EM* RF Output Power Frequency Max Min GSM850 33dBm±2dB 5dBm±5dB EGSM900 33dBm±2dB 5dBm±5dB DCS1800 30dBm±2dB 0dBm±5dB PCS1900 30dBm±2dB 0dBm±5dB WCD
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-FDD B5 23dBm±2dB <-39dBm LTE-FDD B7 23dBm±2dB <-39dBm LTE-FDD B8 23dBm±2dB <-39dBm LTE-FDD B20 23dBm±2dB <-39dBm LTE-FDD B28A 23dBm±2dB <-39dBm LTE-FDD B28B 23dBm±2dB <-39dBm LTE-TDD B41 23dBm±2dB <-39dBm Table 51: SC600Y-NA*/SC600T-NA* RF Output Power Frequency Max Min WCDMA B2 24dBm+1/-3dB <-49dBm WCDMA B4 24dBm+1/-3dB <-49dBm WCDMA B5 24dBm+1/-3dB <-49dBm LTE-FDD B2 23dBm±2dB <-39dBm LTE-FDD B4 23dBm±2dB <-39
Smart LTE Module Series SC600Y&SC600T Hardware Design NOTE In GPRS 4 slots TX mode, the maximum output power is reduced by 3dB. This design conforms to the GSM specification as described in Chapter 13.16 of 3GPP TS 51.010-1. 7.6. RF Receiving Sensitivity The following table shows the conducted RF receiving sensitivity of SC600Y&SC600T modules. Table 52: SC600Y-JP*/SC600T-JP* RF Receiving Sensitivity Receive Sensitivity (Typ.) Frequency Primary Diversity SIMO 3GPP (SIMO) WCDMA B1 -109.5 -111.
Smart LTE Module Series SC600Y&SC600T Hardware Design Table 53: SC600Y-EM*/SC600T-EM* RF Receiving Sensitivity Frequency Receive Sensitivity (Typ.) 3GPP (SIMO) Primary Diversity SIMO GSM850 -111 / / -102.4dBm EGSM900 -100.9 / / -102.4dBm DCS1800 -109.3 / / -102.4dBm PCS1900 -109.3 / / -102.4dBm WCDMA B1 -112 -111 TBD -106.7dBm WCDMA B2 -112 -110 TBD -106.7dBm WCDMA B4 -112 -111 TBD -10dBm WCDMA B5 -113 -111 TBD -104.7dBm WCDMA B8 -111 -111 TBD -104.
Smart LTE Module Series SC600Y&SC600T Hardware Design LTE-TDD B41 (10M) -97.7 -96.7 TBD -94.3dBm Table 54: SC600Y-NA*/SC600T-NA* RF Receiving Sensitivity Frequency Receive Sensitivity (Typ.) 3GPP (SIMO) Primary Diversity SIMO WCDMA B2 -110 -110.5 TBD -106.7dBm WCDMA B4 -110.5 -110.5 TBD -104.7dBm WCDMA B5 -111 -111 TBD -104.7dBm LTE-FDD B2 (10M) -98.9 TBD -101.2 -94.3dBm LTE-FDD B4 (10M) -99 TBD -100 -96.3dBm LTE-FDD B5 (10M) -100.2 TBD -101.7 -94.
Smart LTE Module Series SC600Y&SC600T Hardware Design The following table shows the electrostatic discharge characteristics of SC600Y&SC600T modules. Table 55: ESD Characteristics (Temperature: 25°C, Humidity: 45%) Test Points Contact Discharge Air Discharge Unit VBAT, GND +/-5 +/-10 KV All Antenna Interfaces +/-5 +/-10 KV Other Interfaces +/-0.
Smart LTE Module Series SC600Y&SC600T Hardware Design 8 Mechanical Dimensions This chapter describes the mechanical dimensions of the module. All dimensions are measured in millimeter (mm), and the tolerances for dimensions without tolerance values are ±0.05mm. 8.1.
Smart LTE Module Series SC600Y&SC600T Hardware Design Figure 45: Module Bottom Dimensions (Top View) SC600Y&SC600T_Hardware_Design 119 / 128
Smart LTE Module Series SC600Y&SC600T Hardware Design 8.2. Recommended Footprint Figure 46: Recommended Footprint (Top View) NOTES 1. 2. For easy maintenance of the module, keep about 3mm between the module and other components on host PCB. All RESERVED pins should be kept open and MUST NOT be connected to ground.
Smart LTE Module Series SC600Y&SC600T Hardware Design 8.3. Top and Bottom View of the Module Figure 47: Top View of SC600Y&SC600T Modules Figure 48: Bottom View of SC600Y&SC600T Modules NOTE These are renderings of SC600Y&SC600T modules. For authentic dimension and appearance, please refer to the module that you receive from Quectel.
Smart LTE Module Series SC600Y&SC600T Hardware Design 9 Storage, Manufacturing and Packaging 9.1. Storage SC600Y&SC600T are stored in a vacuum-sealed bag. They are rated at MSL 3, and their storage restrictions are shown as below. 1. Shelf life in the vacuum-sealed bag: 12 months at <40ºC/90%RH. 2. After the vacuum-sealed bag is opened, devices that will be subjected to reflow soldering or other high temperature processes must be: ⚫ ⚫ Mounted within 168 hours at the factory environment of ≤30ºC/60%RH.
Smart LTE Module Series SC600Y&SC600T Hardware Design 9.2. Manufacturing and Soldering Push the squeegee to apply the solder paste on the surface of stencil, thus making the paste fill the stencil openings and then penetrate to the PCB. The force on the squeegee should be adjusted properly so as to produce a clean stencil surface on a single pass. To ensure the module soldering quality, the thickness of stencil for the module is recommended to be 0.18mm~0.20mm.
Smart LTE Module Series SC600Y&SC600T Hardware Design Reflow Zone Max slope 2 to 3°C/sec Reflow time (D: over 220°C) 40 to 60 sec Max temperature 238°C ~ 245°C Cooling down slope 1 to 4°C/sec Reflow Cycle Max reflow cycle 1 9.3. Packaging SC600Y&SC600T are packaged in tape and reel carriers. Each reel is 330mm in diameter and contains 200 modules. The following figures show the package details, measured in mm.
Smart LTE Module Series SC600Y&SC600T Hardware Design Figure 51: Reel Dimensions Table 57: Reel Packaging Model Name SC600Y& SC600T MOQ for MP Minimum Package: 200pcs Minimum Package×4=800pcs 200 Size: 398mm × 383mm × 83mm N.W: 1.92kg G.W: 3.67kg Size: 420mm × 350mm × 405mm N.W: 8.18kg G.W: 15.
Smart LTE Module Series SC600Y&SC600T Hardware Design 10 Appendix A References Table 58: Related Documents SN Document Name Remark [1] Quectel_Smart_EVB-G2_User_Guide EVB User Guide for SC600Y&SC600T [2] Quectel_SC600Y&SC600T_GPIO_Configuration GPIO Configuration of SC600Y&SC600T [3] Quectel_RF_Layout_Application_Note RF Layout Application Note [4] Quectel_Module_Secondary_SMT_User_Guide Module Secondary SMT User Guide [5] Quectel_ SC600Y&SC600T_Reference_Design Reference Design for SC600Y
Smart LTE Module Series SC600Y&SC600T Hardware Design FR Full Rate GMSK Gaussian Minimum Shift Keying GPS Global Positioning System GPU Graphics Processing Unit GSM Global System for Mobile Communications HR Half Rate HSDPA High Speed Down Link Packet Access HSPA High Speed Packet Access I/O Input/Output IQ Inphase and Quadrature LCD Liquid Crystal Display LCM LCD Module LED Light Emitting Diode LNA Low Noise Amplifier LRA Linear Resonant Actuator MIPI Mobile Industry Process
Smart LTE Module Series SC600Y&SC600T Hardware Design RHCP Right Hand Circularly Polarized RTC Real Time Clock Rx Receive SMS Short Message Service TE Terminal Equipment TX Transmitting Direction UART Universal Asynchronous Receiver & Transmitter UMTS Universal Mobile Telecommunications System (U)SIM (Universal) Subscriber Identity Module Vmax Maximum Voltage Value Vnorm Normal Voltage Value Vmin Minimum Voltage Value VI Voltage Input VIHmin Minimum Input High Level Voltage Value
Smart LTE Module Series SC600Y&SC600T Hardware Design 11 Appendix B GPRS Coding Schemes Table 60: Description of Different Coding Schemes Scheme CS-1 CS-2 CS-3 CS-4 Code Rate 1/2 2/3 3/4 1 USF 3 3 3 3 Pre-coded USF 3 6 6 12 Radio Block excl.USF and BCS 181 268 312 428 BCS 40 16 16 16 Tail 4 4 4 - Coded Bits 456 588 676 456 Punctured Bits 0 132 220 - Data Rate Kb/s 9.05 13.4 15.6 21.
Smart LTE Module Series SC600Y&SC600T Hardware Design 12 Appendix C GPRS Multi-slot Classes Twenty-nine classes of GPRS multi-slot modes are defined for MS in GPRS specification. Multi-slot classes are product dependent, and determine the maximum achievable data rates in both the uplink and downlink directions. Written as 3+1 or 2+2, the first number indicates the amount of downlink timeslots, while the second number indicates the amount of uplink timeslots.
Smart LTE Module Series SC600Y&SC600T Hardware Design 15 5 5 NA 16 6 6 NA 17 7 7 NA 18 8 8 NA 19 6 2 NA 20 6 3 NA 21 6 4 NA 22 6 4 NA 23 6 6 NA 24 8 2 NA 25 8 3 NA 26 8 4 NA 27 8 4 NA 28 8 6 NA 29 8 8 NA 30 5 1 6 31 5 2 6 32 5 3 6 33 5 4 6 SC600Y&SC600T_Hardware_Design 131 / 128
Smart LTE Module Series SC600Y&SC600T Hardware Design 13 Appendix D EDGE Modulation and Coding Schemes Table 62: EDGE Modulation and Coding Schemes Coding Schemes Modulation Coding Family 1 Timeslot 2 Timeslot 4 Timeslot CS-1: GMSK / 9.05kbps 18.1kbps 36.2kbps CS-2: GMSK / 13.4kbps 26.8kbps 53.6kbps CS-3: GMSK / 15.6kbps 31.2kbps 62.4kbps CS-4: GMSK / 21.4kbps 42.8kbps 85.6kbps MCS-1 GMSK C 8.80kbps 17.60kbps 35.20kbps MCS-2 GMSK B 11.2kbps 22.4kbps 44.
Smart LTE Module Series SC600Y&SC600T Hardware Desig n IC & FCC Requirement FCC Certification Requirements. According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a mobile device. And the following conditions must be met: 1. This Modular Approval is limited to OEM installation for mobile and fixed applications only.
Smart LTE Module Series SC600Y&SC600T Hardware Desig n WIFI 2.4G/5G NA NA 5. This module must not transmit simultaneously with any other antenna or transmitter 6. The host end product must include a user manual that clearly defines operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
Smart LTE Module Series SC600Y&SC600T Hardware Desig n The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. IC Statement IRSS-GEN "This device complies with Industry Canada’s licence-exempt RSSs.