Preliminary Datasheet Vanchip Confidential VC7916-62 Linear RF Power Amplifier For Quad-Band GSM/GPRS/EDGE /TD-SCDMA/TDD-LTE With SP16T Antenna Switch Product ID：VC7916-62 Version：1.0 Preliminary Datasheet Vanchip Technologies All rights reserved. Products and Product Information are Subject to Change Without Prior Notice.
Preliminary Datasheet Vanchip Confidential VC7916-62 Revision History Version Date Author 1.0 May 2, 2018 Vanchip Modify Description Datasheet All rights reserved. Products and Product Information are Subject to Change Without Prior Notice.
Preliminary Datasheet Vanchip Confidential Product Description Features ¾ Small package: 5.5 x 5.3 x 0.
Preliminary Datasheet Vanchip Confidential VC7916-62 Absolute Maximum Ratings 1,2,3 Parameter Symbol Min. Typ. Max. Unit Supply VBATT -1.2 – 6 V Power Control Voltage Vramp -0.3 – 3 V Input RF Power Pin – – 15 dBm Max. Burst Duty Cycle DT – – 50 % Ru – – 20:1 VSWR 2.
Preliminary Datasheet Vanchip Confidential VC7916-62 MIPI RFFE REGISTER MAP (1) Data Bit Description Trigger Mode R/W Trigger0 R/W Default Notes Register 0, Address 0x00 (Mode Control) [7] [6:3] [2] Register Map and Power Control Selector PA Bias Mode Control 0 0000 0 00 PA Enable Power Gain Mode [1:0] Linear GMSK Power Control register map 0000 = LB EDGE 0100 = B34/39 TD-SCDMA 0110 = LB Switch OUT 0001 = HB EDGE 0101 = B34/39 TDD LTE 0111 = HB Switch OUT 0010 = LB GMSK 0011 = HB GMSK 0
Preliminary Datasheet Vanchip Confidential VC7916-62 MIPI RFFE REGISTER MAP (2) Data Bit Description Trigger Mode R/W No R/W Default Notes Register 26, Address 0x1A (RFFE Status) [7] Software Reset 0 Reset all configurable registers to the default values except for USID, GROUP_SID, and PM_TRIG. The RFFE_STATUS register should be reset after it is read. 0: normal operation ; 1: software reset. [6] Command_Frame _parity_Err 0 Command Sequence received with parity error – discard command.
Preliminary Datasheet Vanchip Confidential VC7916-62 Table 1: GMSK and 8-PSK Recommended Operation Power Mode GSM Band Waveform PRATED Unit 33 29 dBm dBm 8-PSK Low Power Mode (LPM) Ultra Low Power Mode (ULPM) Medium Power Mode (MPM) 23 15 27.5 dBm dBm dBm GMSK Low Power Mode (LPM) Ultra Low Power Mode (ULPM) High Power Mode (HPM) 21.5 15.5 30 dBm dBm dBm Medium Power Mode (MPM) Low Power Mode (LPM) Ultra-Low Power Mode (ULPM) 28.5 22.5 14.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications (GSM850/GSM900 GMSK Mode) Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C , Duty Cycle = 25% , Reference to Table 1, unless otherwise specified Parameter Symbol PA Mode Min. 824 880 33 31 Typ. Max.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications (DCS1800/PCS1900 GMSK Mode) (1 OF 2) Test Condition: NTC, VBATT = VCC = 3.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications (DCS1800/PCS1900 GMSK Mode) (2 OF 2) Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C , Duty Cycle = 25% , Reference to Table 1, unless otherwise specified Parameter Symbol PA Mode All GMSK PA Gain Mode Min. Typ. Max.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications (GSM850/GSM900 8-PSK Mode) Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C , Duty Cycle = 25% , Reference to Table 1, unless otherwise specified Parameter Operation Frequency Symbol f_GSM850_TX f_GSM900_TX Pout_Max_NTC Pout_Max_ETC PAE_Rated_MPM PAE_Rated_LPM PAE_Rated_ULPM Gain_Rated_MPM Gain_Rated_LPM Gain_Rated_ULPM PA Mode Min. Typ. Max. 824 880 27.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications (DCS1800/PCS1900 8-PSK Mode) Test Condition: NTC, VBATT = VCC = 3.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications for TD-SCDMA B39 Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C, unless otherwise specified Signal Configuration: ETSI TS 125.102 UL reference measurement channel (12.2 kbps), 16% duty cycle.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications for TD-SCDMA B34 Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C, unless otherwise specified Signal Configuration: ETSI TS 125.102 UL reference measurement channel (12.2 kbps), 16% duty cycle. Parameter symbol PA mode Min. Typ. Max.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications for TDD-LTE B39 Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C, unless otherwise specified Signal Configuration: 3GPP TS36.101, QPSK/10MHz/12RB, 40% duty cycle, unless otherwise specified Characteristics Operating Frequency Maximum Output Power Power Gain Gain Variation over ETC Symbol f Pout_Max_NTC Pout_Max_ETC Gain_MPM_NTC Gain_LPM_NTC Gain_ULPM_NTC ΔGain_ETC PA_mode MPM MPM LPM ULPM MPM LPM ULPM Min. Typ. Max.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications for TDD-LTE B34 Test Condition: NTC, VBATT = VCC = 3.5V, Ta = 25°C, unless otherwise specified Signal Configuration: 3GPP TS36.101, QPSK/10MHz/12RB, 40% duty cycle, unless otherwise specified Characteristics Symbol PA_mode Min. Typ. Max.
Preliminary Datasheet Vanchip Confidential VC7916-62 Electrical Specifications for TRx Mode Test Condition: NTC, VBATT = 3.5V, Ta = 25 °C , unless otherwise specified RF Ports TRx1 to TRx14 Parameter Frequency Range Insertion Loss Symbol Min. Typ. Max. Unit f IL_TRx_LB 699 — — — — — — — — — 0.8 0.9 1 1.2 1.1 1.25 1.4 1.6 2690 1.0 1.15 1.3 1.5 1.3 1.55 1.7 1.
Preliminary Datasheet Vanchip Confidential VC7916-62 EVB Schematic Illustration Note: 1. ALL RF Input and output Trace with 50 Ohm Microstrip-line. 2. The Schematic will be compatible with VC7916-61 Bill Of Materials for VC7916-62 EVB Item Qty. 1 2 3 4 5 2 2 2 1 1 C105,C108 C101.C1106 C100, C128 C103 C107 Reference CAP,0402,47pF,±5%,50V,COG CAP,0402,22pF,±5%,50V,COG CAP,0402,100nF,±10%,10V,X5R CAP,TANTALUM,68uF, 6.3V, ±10% CAP,0805,10uF,±20%, 6.
Preliminary Datasheet Vanchip Confidential VC7916-62 EVB TOP Assembly Illustration Note: 1. The EVB will be compatible with VC7916-61 All rights reserved. Products and Product Information are Subject to Change Without Prior Notice.
Preliminary Datasheet Vanchip Confidential VC7916-62 Pin illustration and Description 0.834±0.100 5.3±0.1 mm Pin 1 Date Code Trace Code 5.50±0.
Preliminary Datasheet Vanchip Confidential VC7916-62 APT Application Schematics 10 GND 11 100pF GND 9 LB_SWOUT 8 19 38 7 18 GND 17 37 GND 16 GND 15 36 TRX1 14 GND 13 35 TRX2 12 34 GND 6 GND 33 GND GND 5 VBAT CPL 4 ANT 32 TRX5 3 VCC GND 2 GND 31 TRX6 1 VRAMP NC TRX3 TRX14 20 TRX7 TRX4 VIO 21 TRX13 22 SDATA 23 TRX12 24 SCLK 25 TRX11 26 HB_SWOUT 27 TRX10 28 HB_IN 29 TRX9 30 LB_IN APT, Buck DC-DC Supply TRX8 DC Supply 10uF From
Preliminary Datasheet Vanchip Confidential VC7916-62 Package Outline （Unit: mm） Note: Unless otherwise specified 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONS AND TOLERANCING IN ACCORDANCE WITH ASME Y14.5M-1994. All rights reserved. Products and Product Information are Subject to Change Without Prior Notice.
Preliminary Datasheet Vanchip Confidential VC7916-62 PCB Layout Footprint Recommendation（Unit: mm） For PCB Metal/ Stencil Pin to Pin Pitch: 0.48 L: 0.65 W: 0.23 For PCB Solder mask Pin to Pin Pitch: 0.48 L: 0.750 W: 0.33 Note: Unless otherwise specified 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONS AND TOLERANCING IN ACCORDANCE WITH ASME Y14.5M-1994. All rights reserved. Products and Product Information are Subject to Change Without Prior Notice.
Preliminary Datasheet Vanchip Confidential VC7916-62 Tape and Reel VC7916-62 carrier tape basic dimensions are based on EIA 481. The pocket is designed to hold the part for shipping and loading onto SMT manufacturing equipment, while protecting the body and the solder terminals from damaging stresses. Prior to shipping, moisture sensitive parts (MSL level 2a-5a) are baked and placed into the pockets of the carrier tape. A cover tape is sealed over the top of the entire length of the carrier tape.
