Product Info

LPWA Module Series
BG95 Hardware Design
BG95_Hardware_Design 74 / 88
1.
1)
The current consumption in PSM is much lower than that in power off mode, and this is because of
the following two designs:
 More internal power supplies are powered off in PSM.
 Also the internal clock frequency is reduced in PSM.
2.
2)
The module’s USB and UART are disconnected and GSM network does not support PSM.
Table 40: GNSS Current Consumption
Description Conditions Typ. Unit
Searching
(AT+CFUN=0)
Cold start @ Instrument 71 mA
Cold start @ Real network with half sky, Active Antenna 71 mA
Tracking
(AT+CFUN=0)
Instrument Environment @ DPO off 56 mA
Instrument Environment @ DPO on 21 mA
Half Sky @ Real network, Active Antenna, DPO off 56 mA
6.5. RF Output Power
The following table shows the RF output power of BG95.
Table 41: BG95 RF Output Power
EDGE DCS1800 4UL/1DL @ 21 dBm 423 857 mA
EDGE PCS1900 4UL/1DL @ 21 dBm 426 887 mA
Frequency Max. Min.
LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/
B25/B26
1)
/B27
1)
/B31
3)
/B28/B66/B71
2)
/ B72
3)
/B73
3)
/B85
21 dBm +1.7/-3 dB < -39 dBm
GSM850/EGSM900 33 dBm ±2 dB 5 dBm ±5 dB
DCS1800/PCS1900 30 dBm ±2 dB 0 dBm ±5 dB
NOTES