Product Info

LPWA Module Series
BG95 Hardware Design
BG95_Hardware_Design 78 / 88
1.
1)
LTE Cat NB2 receiving sensitivity without repetitions.
2. “*” means under development.
6.7. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the electrostatic discharge characteristics of BG95.
Table 45: Electrostatic Discharge Characteristics (25 ºC, 45% Relative Humidity)
LTE-FDD B66 -104.1/-101.8 -114/-107.5
LTE-FDD B71 Not Supported -115/-107.5
LTE-FDD B85 -104.1/-99.3 -115/-107.5
Network Band Primary Diversity
Sensitivity ( dBm)
GSM/3GPP
GSM
GSM850/EGSM900
Supported
Not
Supported
-107/-102
DCS1800/PCS1900 -107/-102
Tested Interfaces Contact Discharge Air Discharge Unit
VBAT, GND ± 10 ± 12 kV
Main/GNSS Antenna
Interfaces
± 5 ± 5 kV
NOTES