Installation Guide

LMU-2x20™ Hardware and Installation Guide

V1.0.10 December 12, 2010

Configuration and Activation

3.5 Configuration Quick Start Guide

This section details how to quickly get an LMU-2x30™ provisioned and configured to point

at a specific server. It is assumed that a PEG script has already been created and is being

managed through LMU Manager or PULS™, the CalAmp Maintenance System.

We are making three assumptions to simplify the setup process:

 You have created, installed and configured an LM Direct™ Server to receive

messages from the LMU-2x30™. (See LM Direct™ Reference Guide for details)

 You are using the standard wiring harness from CalAmp and the serial port

expansion harness.

 You have created a HyperTerminal or Putty session as described in Appendix A and

B respectively