User Guide N402 TRACKER
Contents 1. Introduction page 1 2. Product specifications page 1 3. Product diagram page 2 4. Installation instructions page 3 5. Pairing instruction page 5 6. Reverse logistics page 7 7. FCC warnings page 8 8.
1. Introduction N402 is a tracker destined to shipping container monitoring by the collection of data and has been designed to function by being placed on a container’s door. 2. Product Specifications Weight ≈ 250g Dimensions 135 x 85.5 x 69.5mm Temperature range + sensor -40°C to +60°C / -40°F to +140°F Motion / Orientation sensor Accelerometer : ±2g to ±16g Gyroscope : ±245 to ±2000dps Barometric Pressure 300 to 1100 hPa @ ±1.
3.
4. Installation instructions Step 1. Install the device on the container door, the thickest part on the inside, as high as possible (ideally higher than the red mark sometimes present inside the container). Choose the door without the seal on the side (normally on the left).
Step 2. The device will be held by the magnet, which will also detect the tracker’s placement and activate it. Step 3. You can then close the opposite door, which seal will complete the tracker’s installation by maintaining it safely in place.
5. Pairing instructions To pair a device in position on the container to a shipment in the N4VIEW tracking platform, please follow the following instructions.
Select the tracker’s IMEI Insert the container’s number Select the shipment’s destination Select the shipment’s owner Enter the estimated date of departure for this shipment Or enter the forced actual date of departure for this shipment (optionnal) Enter the estimated date of arrival for this shipment (optionnal) The forced actual date of arrival can only be added when editing a shipment Enter the ship’s IMO Click on « create » 6
6. Reverse logistics If you wish to retrieve your trackers degressive value when the same return them yourself. • It can also be considered to use an at the end of an expedition, you must Here are our recommendations for international returns: • You can use the following HS Code for devices returns, which is not subject to custom duties: 8526912099. • These returns are still subject to 20% VAT, but this is normally recoverable. • The pro forma invoice is required.
7. FCC warning 15.19 Labeling requirements. harmful interference to radio communications. However, This device complies with part 15 of the FCC Rules. there is no guarantee that interference will not occur in Operation is subject to the following two conditions: (1) This a particular installation.
8. CE warning Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The device complies with RF specifications when the device used more than 20cm form your body. Hereby, NEXT4 declares that this device is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.
Designed and distributed by NEXT4 3 avenue Didier Daurat 31400 Toulouse France next4.
