Specifications

ManualsBrandsQuectel ManualsComputers & AccessoriesOMO HUB

Table Of Contents

The device serves as a gateway between the IP network, the

ZigBee and BLE MESH wireless network. It allows to organize a

wireless network of sensors, actuators and automation

equipment into a single system for collecting and processing

information using cloud computing

Device Name "OMO HUB PRO NEO 1.0"

Normal conditions of use

Rated temp. - 0…50°

Extreme temp. -5…+55°C

Nominal Humi .- 30-50%

Nominal Humi. - 25-90%

Atmospheric pressure - from 710 to 785 mm Hg.

Specifications

Physical Interfaces



Power socket - 1 pc. DC 5.5 / 2.1 mm.

 USB-С host/slave for software upload - 1 pc.



Ethernet socket for Hub Internet connection- 1 pc. RJ45 8P8C.



HDMI Micro jack for monitor connection - 1 pc.



Socket for connecting an external wired relay with connector detecting function via closed loop - 1 pc.

RJ-11.

 Socket for connecting an external wired opening sensor - 1 pc. RJ-11.

Indication



Side Bars indicators on front side - RGB LED.



OMO Logo indicator on front side - RGB LED.

 ZigBee Act indicator near the antenna connector on the side.

 LTE Act indicator near the antenna connector on the side.

Computing module



Module type - SOM RK3328.



RAM size - 2 Gbyte RAM.



ROM size - 32 Gbyte eMMC.



Type of interface for downloading operational system software - USB Slave.



Type of connector for firmware upload - TC2050-IDC-NL.



OTA Remote Software Update – Supported

Summary of content (3 pages)

PAGE 1
The device serves as a gateway between the IP network, the ZigBee and BLE MESH wireless network. It allows to organize a wireless network of sensors, actuators and automation equipment into a single system for collecting and processing information using cloud computing Device Name "OMO HUB PRO NEO 1.0" Normal conditions of use Rated temp. - 0…50° Extreme temp. -5…+55°C Nominal Humi .- 30-50% Nominal Humi. - 25-90% Atmospheric pressure - from 710 to 785 mm Hg.
PAGE 2
 ZigBee IEEE802.15.4 ZigBee module Module type - EFR32MG21 omo.ubm-01 Module connection interface - UART. Module firmware upload interface - SWD. Frequency band - 2.4GHz Transmission rate - 250Kbit/s Type – OQPSK Antenna Type - External. Antenna Gain: < 5 dBi  Bluetooth Bluetooth Compatible with Bluetooth 5.0 and Bluetooth mesh specification Model Name: DSM-055 IEEE802.15.1 BLE module Module type - EFR32BG21A010F768IM32-B RF center frequency - 2.45 GHz.
PAGE 3
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.