Instructions for use and operation IoT Tracking & Monitoring „Schraubmodul“ TM1xxx IoT Tracking & Monitoring „Kompaktmodul“ TM2xxx IoT Tracking & Monitoring „Schraubmodul“ IoT Tracking & Monitoring „Kompaktmodul“ Model series: TM1xxx Model series: TM2xxx Page 1
Table of contents for the documentation 1. Foreword ................................................................................................................................................... 3 1.1 About this documentation .......................................................................................................................... 3 1.2 Explanation of the symbols used............................................................................................................... 3 1.
12.3 Technical Drawings IoT Tracking & Monitoring „Kompaktmodul“ ........................................................... 20 13. 1. Certification en......................................................................................................................................... 21 Foreword IOT TRACKING & MONITORING MODULE OPERATING GUIDE FOREWORD Thank you for purchasing an IoT Tracking & Monitoring Module. This manual will show you in detail how to start up the device smoothly.
hazards may be encountered. The product and its ancillary equipment may present hazards if used improperly by untrained personnel or if used improperly. 1.4 Declaration of Conformity We declare under our sole responsibility that the product described here complies with the applicable directives and standards. You will find a copy of the declaration of conformity at the end of this documentation. 2. Security 2.1 General safety instructions Read all safety and other instructions.
Integrated accelerometer 0 to 16g Integrated detection algorithms and FFT analysis for autonomous detection of the operating state (rest, transport, engine idle, operation).
Firmware update via "Over the Air" (OTA) via external battery connector Optional: Firmware update via "Over the Air" (OTA) Optional: Detection of device battery voltage and ignition signal via optional connection to device battery; cable and connector (e.g. DEUSCH connector DT04-3P) tbd Optional: bidirectional data interface to device (e.g. CAN bus); cable and connector tbd Technical data: Environmental requirement: Designed for extreme loads.
Technical data: Connections: 2-pin DEUTSCH plug for Connection to the IoT-Module Environmental requirement: Designed for extreme loads. Electronics fully potted Protection class IP69, temperature -20°to +70°degrees Celsius, also condensing Resistant to vibrations Electrical data Type: Lithium battery Capacity: 3400m Ah Output voltage: 7.2 V Attention: Battery module only cpl.
IoT Tracking & Monitoring “Kompaktmodul” TM2001, battery No connectors, internal battery Description: platform base to provide location coordinates and information about the To provide operating status of the connected device.
Designed for extreme loads. Electronics fully potted Protection class IP69, temperature -20°to +70°degrees Celsius, also condensing Resistant to vibrations Electrical data: Type: Lithium battery (fully potted) Capacity: 3200 mAh Output voltage: 7.2 V Attention: Battery module only complete replaceable Battery not rechargeable Mechanical data Weight: ≈ 350 g Outer dimensions housing: Ø 153.2 x 99.3 mm Color: black 3.
Resistant to vibrations Electrical data Type: Lithium battery Capacity: 3400m Ah Output voltage: 7.2 V Attention: Battery module only complete replaceable Battery not rechargeable Mechanical data Weight: ≈ 300 g Outer dimensions housing: 77.7 x 42 mm Cable length 20 mm Color: black 3.5 Scope of delivery 1x IoT Tracking & Monitoring „Kompaktmodul“ with any accessories 1x user manual 3.6 Accessories Is none provided 3.
NB-IoT / LTE-M SIM card Antennas NB-IoT / LTE-M GPS 5.1 Technical details DC power supply Lithium battery 7.2V or external 12V supply Battery life typical 2-3 years / 5 years Battery capacity lithium battery 7.2V 3400mAh Voltage range battery 4,5-8V Voltage range external 7-15VDC Digital input (ignition signal): 0-15VDC 6. Operation 6.
It is not recommended to install the unit inside the device (vehicle, etc. ) The GPS reception signal will be reduced and GPS functionality will be disturbed if the windshield is bonded with a metallic thermal insulation layer or heating layer.
6.
6.3 Commissioning of the IoT Tracking & Monitoring „Schraubmodul“ Function display after plugging in the battery 6.
Mounting of battery module for IoT tracking & monitoring „Schraubmodul“ 6.5 PIN assignment of the IoT Tracking & Monitoring „Schraubmodul“ 6.
7.
7.1 Deactivation IoT Tracking & Monitoring „Schraubmodul“ and „Kompaktmodul“ Unplugging or removing the battery. 8. Packing and transport Risk of material damage. Store and transport the device only within a temperature range of 0°C to +40°C / 32°F ... +104°F 9. RoHS (Restriction of Hazardous Substances) This chapter contains information on RoHS. 10.
The housing is made of plastic with sensitive electronic components and batteries inside.
Radiofrequency radiation exposure information: This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. 12. Appendix 12.1 Technical Drawings IoT Tracking & Monitoring „Schraubmodul“ 12.
12.
13.