Use Instructions

Page 6
 Firmware update via "Over the Air" (OTA) via external battery connector
 Optional: Firmware update via "Over the Air" (OTA)
 Optional: Detection of device battery voltage and ignition signal via optional connection to device
battery; cable and connector (e.g. DEUSCH connector DT04-3P) tbd
 Optional: bidirectional data interface to device (e.g. CAN bus); cable and connector tbd
Technical data:
Environmental requirement:
 Designed for extreme loads. Electronics fully potted
 Protection class IP69, temperature -20°to +70°degrees Celsius, also condensing
 Resistant to vibrations
Connections:
 2-pin DEUTSCH connector for battery module connection
 Optional: 3-pin DEUSCH connector (DT04-3P) for external battery and ignition signal
Mechanical data
 Weight: ≈ 350 g
 Outer dimensions housing: Ø 52 x 35 mm
 Cable length: 180 mm
 Total length: 184.1 mm
 Color: black
 Plastic locknut: M36
3.2 Battery module for IoT tracking & monitoring „Schraubmodul“ Vehicle, or device monitoring,
and tracking system on platform basis.
Battery Module for IoT Tracking &
Monitoring „Schraubmodul“
Lithium battery cpl. potted
Description:
 Battery module for vehicle or equipment monitoring and tracking system
 on a platform basis.
 Water resistant IP69 suitable for outdoor use and for cleaning with high pressure
 Vibration resistant against strong shaking
 Standardized or customized, tailor-made solutions of the battery module for IoT tracking & monitoring
„Schraubmodul“ possible