2893222COM Fireplace / TV Stand B342893222COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1‐800‐489‐3351 (toll free) Monday‐Friday 9am ‐ 5pm CST Visit: www.ameriwoodhome.com WARNING ‐ Unit can tip over causing severe injury or death. ‐ Anchor unit to stud in wall (if instructed to). ‐ Do Not allow children to climb on unit. ‐ Put heavy items on lower shelves or drawers.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐800‐489‐3351 Monday‐Friday 9am ‐ 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 ESTIMATED ASSEMBLY TIME: 2 HOUR ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size A D C B Right Panel Left Panel 32893222010 32893222020 Partition 32893222030 Top 32893222040 E G F Shelf 32893222060 Bottom 32893222050 TV Rail 32893222070 This piece is paperboard construction It is not made from wood, but is required for the assembly of your unit.
Board Identification Not actual size D B G F K C I A J H J H E 6
Part List Note: Your model may have extra hardware included.
STEP 1 3 (x2) #A22910 8 Quick Assembly 5 Tip (x3) #A22620 (x2) #A21670 Proper orientation of CAM LOCK 5 3 A 5 8 5 3 8 8
STEP 2 1 8 Quick 13 Assembly 5 Tip (x2) (x3) (x2) #A22610 #A22620 #A21670 (x2) #A65640 Proper orientation of CAM LOCK Loosen screw to separate the hinge plate from the hinge.
STEP 3 1 8 3 13 5 (x3) (x2) (x2) #A22910 #A22620 #A21670 (x2) #A22610 8 5 (x2) #A65640 3 1 8 5 5 5 1 C C (left surface) (right surface) 13 Separate hinge plate from hinge as you did in the previous step.
STEP 4 1 8 Quick Assembly 5 Tip (x2) (x6) (x6) #A22610 #A22620 #A21670 Proper orientation of CAM LOCK LOCK UNLOCK 5 K 5 8 8 8 5 5 1 F 1 5 8 8 11 8
STEP 5 UNLOCK finished edges face up F K 12 LOCK
STEP 6 6 (x4) #A22920 6 6 H x2 Be sure the connector is positioned as shown before tapping into hole.
STEP 7 Engage the connectors (6) with the connector bolts (3) and turn the connector clockwise to lock in place. 6 Turn clockwise to lock in place.
STEP 8 Engage the connectors (6) with the connector bolts (3) and turn the connector clockwise to lock in place. 6 Turn clockwise to lock in place.
STEP 9 UNLOCK finished edges face up B F K C 16 LOCK
STEP 10 15 11 14 (x15) #A12420 (x5) #A54800 (x5) #A44320 15 11 11 11 14 E 17
STEP 11 4 (x6) #A23030 finished edges face up B F K 4 C 4 4 4 E 4 4 18
STEP 12 4 (x2) #A23030 E A 4 4 19
STEP 13 1 (x9) #A22610 3 (x2) #A22910 1 1 1 1 1 D 1 3 1 1 1 3 G 20
STEP 14 6 (x2) #A22920 6 6 I Be sure the connector is positioned as shown before tapping into hole.
STEP 15 Engage the connectors (6) with the connector bolts (3) and turn the connector clockwise to lock in place. rounded edge I flat edge G 6 Turn clockwise to lock in place.
STEP 16 UNLOCK Note: cam bolts (1) are close to the front edge than the back edge.
STEP 17 UNLOCK B G I D C A 24 LOCK
STEP 18 12 (x26) #A21110 With the help of another person, carefully turn your unit over on its front side. Unfold the back panel (L). Position as shown. Align squarely with all outer edges as shown and nail straight into the back edges as shown. 12 Be sure your unit is square. Distance from corner to corner should be the same. "raw surface" Note: The back panel has three perforated holes in it. The end with the two perforated holes goes toward the bottom.
STEP 19 2 (x6) #A12120 2 2 2 16 2 2 2 Note: You will attach the fireplace insert to the vertical rails (H) by screwing into the groove of the vertical rail.
STEP 20 2 7 (x1) #A12120 (x1) #A53655 16 E 2 7 Attach angle bracket (7) with screw (2) as shown.
STEP 21 9 10 (x2) #A17400 13 (x2) #A52365 (x4) #A65640 13 13 J x2 9 10 28
STEP 22 J J Tighten this screw Engage the hinge arm with the hinge plate and tighten screw.
STEP 23 Door Adjustment A B C To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen screw "C" on BOTH hinges and tighten "B" moves door outward. Loosen "B" and tighten "C" moves doors inward. To adjust depth: Loosen screw "B" and adjust door.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. Apply the TV Warning label to your unit for future reference. NOTICE: Once applied to your model, you will not be able to remove it. 120 lbs 54.4 kg 25 lbs 11.3 kg 25 lbs 11.3 kg Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1‐800‐489‐3351 (Gratis) Lunes ‐ Viernes 9am ‐ 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 9 Afloje el tornillo para separar la pala de la bisagra. Página 10 Separe la pala de la bisagra como lo hizo en el paso anterior. Página 13 / 21 Asegúrese de que el conector esté posicionado como se muestra antes de hacer rosca. Página 14 / 15 / 22 Conecte los conectores (6) con los aprietahilos (3) y gire el conector en el sentido de las agujas del reloj para asegurarlo en su posición. Gire en el sentido de las agujas del reloj para asegurarlo en su posición.
Español Página 30 Ajustar la puerta Para ajustar la altura vertical: Afloje los tornillos “A” de ambas bisagras. Normalmente están en ranuras, lo que le permite ajustar unos milímetros hacia arriba o hacia abajo. Luego, vuelva a ajustarlos. Para ajustar la profundidad: Afloje el tornillo “B” y ajuste la puerta. Para ajustar hacia los lados: Aflojar el tornillo “C” de AMBAS bisagras y apretar “B” desplaza la puerta hacia afuera. Aflojar “B” y apretar “C” mete la puerta hacia adentro.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐nous: 1‐800‐489‐3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 9 Desserrer la vis pour séparer la plaque de charnière de la charnière. Page 10 Séparez la plaque de charnière de la charnière comme vous l'avez fait à l'étape précédente. Page 13 / 21 Assurez‐vous que le connecteur est positionné comme illustré avant d'enfoncer dans le trou. Page 14 / 15 / 22 Engagez les connecteurs (6) avec les boulons de connecteur (3) et tournez le connecteur dans le sens des aiguilles de la montre pour le verrouiller en place.
Français Page 30 Réglage de la porte Pour régler la hauteur verticale : Desserrez les vis « A » des deux charnières. Elles sont généralement dans des trous fendus qui vous permettent de régler vers le haut ou vers le bas de quelques millimètres. Resserrez ensuite. Pour ajuster la profondeur : Desserrez la vis « B » et ajustez la porte. Pour régler côte à côte : Desserrer la vis « C » sur les DEUX charnières et serrer « B » déplace la porte vers l'extérieur.
