User Manual

25
STEP18
(x26)
#A21110
12
12
"rawsurface"
Withthehelpofanotherperson,carefullyturnyourunitoveronitsfrontside.Unfoldthe
backpanel(L).Positionasshown.Alignsquarelywithallouteredgesasshownandnail
straightintothebackedgesasshown
.
Besureyourunitissquare.Distance
fromcornertocornershouldbethe
same.
Note:Thebackpanelhasthreeperforated
holesinit.Theendwiththetwoperforated
holesgoestowardthebottom
.