4474439(Light Gray Velvet) Upholstered Daybed and Trundle Twin Weight Limit: Daybed: 400 Lb / 181 Kg Trundle: 250 Lb / 113 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/replacement-parts or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. KT.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
C Parts D Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts O Z This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Armrest Armrest X1 X1 V Wooden Slat X 50 Leg X4 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
A Parts G Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts B K This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Back Rest Front Panel Front Panel Rear Rail X1 X1 X1 X1 F E Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts IMPORTANT: Below part numbers list is unique to your product. Please keep it on hand when calling for replacement parts. Replacement Parts, visit www.dhpfurniture.
1 3 2 Hardware Pack:Daybed 4 Hardware Pack #: T4474439-00 1/4" X 3/4" X8 1/4"X 1 3/16" X 20 1/4"X 1 9/16" X 12 5 5/16"X 2 1/4" X4 Allen Key 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
1 Hardware Pack: Trundle 4 3 2 Hardware Pack #: T4144719LS-01 1/4" X6 1/4" X 3/4" X8 1/4"X 1 3/8" X6 1/4"X 1 9/16" X6 5 6 Allen Key 4mm X1 Wrench X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
4 The following instructions will illustrate how to assemble the Daybed from Step 1 to Step 7. Please use the Daybed Hardware Pack: T4474439-00. Z Attach Z x 4 to C and D with x. D Do not completely tighten the Bolts, leave half of thread exposed. Screw v to C and D, leave half of the thread exposed. C D 2 4 To avoid fraying the fabric during assembly, please lay the armrests C and D on a piece of cardboard.
W A Attach V and W to A with u. 1 Small holes on V & W should be facing upward.
C A Hang A on C & D as illustrated below, W 2 C don't completely tighten the BOLT v until STEP 4 is complete.
Flange of bracket on E must be located on the inside of the bed. Attach E & F & U to C and D with v . Then properly tighten all the Bolts. C C 2 C U 2 2 F E C A U F E 2 Slat holes on part E & F should be facing upward.
Stretch and stick the bottom edge of A onto U as illustrated.
6.1 Attach B to E with w. 6.2 Attach K to A with w. A B E K 3 3 6.1 6.2 Holes on part K should face upward.
O X O X Y O O K 7.2 7.1 F 7.3 7.1 Insert O into X; 7.2 Press X into K, repeat the same procedure for the opposite side of the bed with a new O and X to press X into E. 7.3 Insert ends of both slat O into Y, then press Y into F as illustrated. Repeat the same procedures going backwards for every row of slats. SLAT WARNING X Y K Correct: Slat curve should be facing upwards. O F E Incorrect: Slat curve facing downwards.
Caster holes on H towards upward. The following instructions will illustrate how to assemble the Trundle from Step 8 to Step 12. Please use the Trundle Hardware Pack: T4144719LS-01. 8.1 Lay H x 2 on the floor with holes towards upward as illustrated. 8.2 Lay J and I x 2 with the slat holes facing downwards. 8.3 Insert H x 2 into I x 2 and J as illustrated. H H H 8.1 Slat holes on part I and J towards floor as illustrated. H 8.2 J I I 8.
4 6 4 Attach I x 2 & J to H x 2 with v using y 6 H and H ❹ using ❻.
1 1 Attach P x 2 & N x 2 to H x 2 with ❶. H N P I In order not to damage your product, please orient lever to the inside of the trundle as illustrated. H J N H J P Caster N should be assembled on the side near Part J.
Turn over the frame assembled from STEP 10. G Attach G to J with ❸. J 3 Check if slat holes on I & J are all on the top side in this STEP.
O X X Y O O O J I 12.1 12.2 12.1 Insert O into X; 12.2 Press X into J, repeat the same procedure for the opposite side of the trundle with a new O and X to press X into I; 12.3 Insert ends of both slats O into Y, then press Y into I as illustrated. Repeat the same procedures going backwards for every row of slats. 12.3 X Y J SLAT WARNING O X Correct: Slat curve should be facing upwards. I Incorrect: Slat curve facing downwards.
Helpful Hints How to lock caster? How to unlock caster? To use Trundle: Pull out the trundle completely from underneath daybed. Once positioned, make sure casters are locked by pushing down the lever "ON" as illustrated "How to lock caster!". To store Trundle: Unlock the casters by pushing down the lever "OFF" as illustrated "How to unlock caster!" and push in the Trundle underneath the Daybed.
Weight Limit: Daybed: 400 Lb / 181 Kg Trundle: 250 Lb / 113 Kg Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed. ● Only use a mattress which is 74" - 75" long and 37½" - 38½" wide on daybed.
4474439(Rosa Terciopelo gris) Diván con cama deslizable Individual Fecha de compra Número de lote Gracias por su compra DHP! Información sobre la garantía DHP garantiza que este producto está libre de defectos de fábrica en la mano de obra y el material y se compromete a solucionar dichos defectos. Este producto tiene una garantía limitada de 1 año a partir de la fecha de compra original. Esta garantía se limita a reparar o reemplazar piezas defectuosas solamente.
Partes Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts IMPORTANTE: la lista de números de pieza que aparece a continuación es exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto. Todas las partes enumeradas en la tabla de abajo, están en la Caja A. Si falta la Caja B, por favor póngase en contacto con su Distribuidor. Incluye una (s) caja (s) que contiene (n) componentes que se re requieren para completar este montaje.
Paquete de componentes Paquete de componentes #: T4474439-00 T4144719LS-01 Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instruccíones de paso a paso. Los tornillo(s), perno(s) que se utilizarán en cada paso se muestran en tamaño real en la esquina inferior derecha de cada página. Instrucciones Colgar A & B en C & D como se ilustra ,no los apriete completamente el PASO 5 sea compleatado.
Límites de peso: 400 Lb / 181 Kg Límite de peso cama deslizable: 250 Lb / 113 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
NE RETOURNEZ PAS AU MAGASIN ! 4474439(Rose Velours gris) Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lit d'appoint avec lit gigogne Visitez www.dhpfurniture.
Pièces Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts IMPORTANT: La liste des références ci-dessous est propre à votre produit. Veuillez le garder sous la main lorsque vous appelez des pièces de rechange. Ce produit est emballé dans 2 boîtes! Tous les produits qui figurant dans le tableau ci-dessous sont dans la boîte A. Si vous n'avez pas la boîte B, veuillez contacter votre détaillant.
Quincaillerie Emballage coque #: T4474439-00 T4144719LS-01 Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble est achevé, sauf indication contraire dans les intructions étape par étape. les vis & boulons utilisés dans chaque étape sont présentés en taille réelle dans le coin inférieur droit de la page. Instructions Étape 1 Les instructions suivantes illustreront comment assembler le Divan de l'étape 1 a l'étape 7.
Limite de Poids: 400 Lb / 181 Kg Limite de Poids lit gigogne:250 Lb / 113 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
