Technical data

BACnet/IP Controller 750-830 • 127
LED Signaling
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
After elimination of the error, the controller must be restarted by means of
switching the power off and on again.
Tab. 3-24: Signaling of the "I/O" LED
I/O Meaning
green Data cycle on the internal bus
off No data cycle on the internal bus
red Controller hardware defect
red flashing During run-up: Internal bus initialized
During operation: General internal bus error
red cyclical flashing Error message for bus module reset and internal error.
This error message is evaluated as an error code and error argu-
ment on the basis of the blink code.