Technical data

BACnet/IP Controller 750-830 • 137
Technical Data
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
3.1.11 Technical Data
System data
System data ETHERNET
Number of controllers Limited by ETHERNET specification
Transmission medium Twisted Pair S-UTP 100 W CAT 5
max. length of fieldbus segment 100 m acc. to IEEE 802.3 standard
max. network length acc. to IEEE 802.3 standard
Baud rate 10/100 Mbit/s
Fieldbus coupler connection 1 x RJ45, 1 x RS232
Protocols BACnet/IP, BACnet PTP, MODBUS/TCP (UDP), HTTP,
BootP, DHCP, DNS, SNTP, FTP, SNMP V1, SMTP
Serial system data (BACnet PTP)* * available from software version 2
Baud rate 9600 baud ... 115 200 baud
max. length of fieldbus segment 15 m depending on the baud rate / on the cable (at 19200
baud)
Fieldbus coupler connection 1 x D-Sub 9 socket
Programming WAGO-I/O-PRO CAA
IEC 61131-3-3 IL, LD, FBD (CFC), ST, FC
BACnet device profile B-BC (BACnet-Building-Controller)
Standards and regulations (see chapter 2.2)
EMC CE Immunity to interference in acc. with EN 61000-6-2 (2005)
EMC CE Emission of interference in acc. with EN 61000-6-3 (2001) +A11:2004
Vibration resistance acc. to IEC 60068-2-6
Shock resistance acc. to IEC 60068-2-27
Degree of protection IP 20
Approvals (see chapter 2.2)
C
UL
US
(UL508)
Conformity marking
BACnet conformity test in preparation
Accessories
PC software WAGO BACnet Configurator
Miniature WSB Quick marking system
Technical Data
Number of bus modules
with bus extension
64
250
Configuration via PC
Program memory 512 Kbytes
Data memory 256 Kbytes
Non-volatile memory (retain) 24 Kbytes (16 Kbytes retain, 8 Kbytes flag)
Voltage supply DC 24 V (-25 % ... +30 %)
Input current
max
500 mA at 24 V
Efficiency of the power supply 87 %
Internal current consumption 300 mA at 5 V
Total current for bus modules 1700 mA at 5 V
Isolation 500 V system/supply