Technical data

Component Update • 21

Technical Condition of the Devices

WAGO-I/O-SYSTEM 750

BACnet/IP Controller

2.4 Component Update

For the case of an Update of one component, the lateral marking on each com-

ponent contains a prepared matrix.

This matrix makes columns available for altogether three updates to the entry

of the current update data, like production order number (NO; starting from

calendar week 13/2004), update date (DS), software version (SW), hardware

version (HW) and the firmware loader version (FWL, if available).

Update Matrix

Current Version data for: 1. Update 2. Update 3. Update

Production Order

Number

" only starting from calendar

week 13/2004

Datestamp

Software index

Hardware index

FWL

" only for coupler/controller

Firmware loader

index

If the update of a component took place, the current version data are registered

into the columns of the matrix.

Additionally with the update of a field bus coupler or controller also the cover

of the configuration and programming interface of the coupler or controller is

printed on with the current manufacturing and production order number.

The original manufacturing data on the housing of the component remain

thereby.

2.5 Storage, Assembly and Transport

Wherever possible, the components are to be stored in their original packag-

ing. Likewise, the original packaging provides optimal protection during

transport.

When assembling or repacking the components, the contacts must not be

soiled or damaged. The components must be stored and transported in appro-

priate containers/packaging. Thereby, the ESD information is to be regarded.

Statically shielded transport bags with metal coatings are to be used for the

transport of open components for which soiling with amine, amide and sili-

cone has been ruled out, e.g. 3M 1900E.