Technical data

302 • List of all BACnet Properties in Native Operation
Priority_Array
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
6.59 Priority_Array
Data Type BACnetPriorityArray
Objects Binary Output, Analog Output
Description This property is a read-only array that contains prioritized
values/commands that are in effect for this object. See sec-
tion 4.2.1.2.3.2 for a description of the prioritization mecha-
nism.
6.60 Priority_For_Writing
Data Type Unsigned (1...16)
Objects Scheduler
Description This property defines the priority at which the referenced
properties are commanded. It corresponds to the 'Priority'
parameter of the WriteProperty service. It is an unsigned in-
teger in the range 1-16, with 1 being considered the highest
priority and 16 the lowest.
6.61 Protocol_Object_Types_Supported
Data Type BACnetObjectTypesSupported
Objects Device
Description This property, of type BACnetObjectTypesSupported, indi-
cates which standardized objects are supported by this de-
vice's protocol implementation. The list of properties sup-
ported for a particular object may be acquired by use of the
ReadPropertyMultiple service with a property reference of
ALL.