Technical data

72 • BACnet/IP Controller 750-830
Data Exchange
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
0x0000
0x00FF
0x0000
(0x0200)
00x0FF
(0x02FF)
0x6000
0x62FC
0x6000
(0x7000)
0x62FC
(0x72FC)
PII = Process Input
Image
PIO = Process Output
Image
MODBUS master
PII
PIO
I/O modules
Inputs
Outputs
Programmable Fieldbus Controller
Fig. 3-9: Data exchange between MODBUS Master and bus modules g015045e
Register functions start at address 0x1000. These functions can be addressed
in a similar manner with the MODBUS function codes that are implemented
(read/write).
The specific register address is then specified instead of the address for a mod-
ule channel.