Technical data

BACnet/IP Controller 750-830 • 89
Fieldbus Node Start-up
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
Fig. 3-2: HTML pages of the Web-based management system G083050e
Note
If these pages are not displayed for local access to the fieldbus nodes, you
must define in the Web browser properties that, as an exception, no proxy
server is to be used for the node IP address.
Note
If DHCP and BootP are activated and an ISDN/DSL router is incorporated in
the network (factory default settings with DHCP server), addresses will be
assigned automatically after a loss of power (loss of 24-V-DC power to con-
troller) from the address range for the ISDN/DSL router. As a result, all con-
trollers will be assigned new IP addresses!
4. In the left navigation bar click on Port to open the HTML page for select-
ing a protocol.