User manual

HPi110 & HPi210
Quick Rig (QR) Systems
User Manual
HPi110 & HPi210 Quick Rig (QR) Systems
21
HPi110 with t-Spine
and vertical link bar
The angle
shown
is a 15˚
setting.
Attaching the Brackets to the Boxes
Hook the vertical link bar at the back
of the top speaker.
1
Bolt the 2 M10 screws back in place. That
will lock the vertical bar onto the speaker.
Make sure the screws are tight.
2
Hook the bottom speaker at the end of the
vertical link bar. (This can be done before
or after the top cabinet is flown)
3
Select the angle of the second cabinet
(compare to the first one) by sliding the
quick pin in the slots (operation similar
to selecting the angle for the Wall Mount
assemblies).
4