User manual

HPi110 & HPi210
Quick Rig (QR) Systems
User Manual
HPi110 & HPi210 Quick Rig (QR) Systems
6
The QR1 kit
(standard for fixed
wall mounting
installations) comes
complete and
assembled, with the
right screws and
bolts to install a
single HPi110.
The installation Spine (i-Spine) offers
a more elegant solution for permanent
installations. The row of holes at the rear
of the spine allows for vertical tilt when
wall-mounted.
The i-Spine comes with an M8x50 custom
Quick Pin (Q-Pin) as well as a pair of long
M10 counter sunk screws.
Ordering reference:
ACHPiATS
Option Note for QR-1
(Available as a separate component)
The touring Spine (t-Spine) is
recommended for a precise and easy
hanging setup of the speaker when
used when flying a single speaker.
The holes, on each side, allow for a
5o stepped tilt of the cabinet [from
-15˚ to +45˚] Only one rated shackle
is necessary to use the Spine in
most applications (a quick-pin is also
included with the t-Spine).
The t-Spine can also be used as part
of a more complex rigging system.
Primary applications include:
• Wall Mount applications where tilt is
not needed
• Vertically Arraying 2 Speakers
Kit QR1: Fixed Wall Mounting without Panning
Name & Reference Application In the Kit
Kit QR1
Order Ref: ACHPiQR1
• 1 speaker
• Wall Mounting
• Tilt (0-30o)
• No panning
• Wall-Mount assembly (fixed)
• Installation Spine
• Quick pin 8x50
• Screws (2x M10)