User manual

Q-Matrix 88
User Manual
User Manual
Q-Tech Commercial Series Q-Matrix 88
12
Remote Wall Panels
Up to 8 x Remote wall panels can be •
connected to a single Q Matrix 88 unit
(with only one per zone).
There are 2 types of remote wall control •
panel available: QTVCS - which includes
source select/Volume Control and the
QTIWML - which has both MIC and Line
inputs.
The QT1WML enables the source selection •
for a zone, zone source level control of
the Q Matrix 88, connection of a local line
source, connection of a local microphone
and the mixing of the local line source
with the local mic source. The output of
the QT1WML connects to the Zone Local
Input of the Q Matrix 88.
The QTVCS enables source selection for a •
zone, and zone source level control of the
Q Matrix 88.
86mm
146mm
86mm
146mm
When a Remote Wall Control Panel is •
connected to a Zone Remote Control
Input and the input is enabled on the rear
of the Matrix, the Matrix zone front panel
music level and source select functions
will be disabled.
The Remote Wall Control Panel will have •
control over source select and music level.
MIC1 level and Master level controls will •
remain enabled on the Matrix Front Panel
at all times. When a remote wall control
panel is connected but disabled on the
rear of the Matrix, the Matrix music level
and source select will be enabled.
MIC1 and master volume will be always •
effective .
Please note that optional black wall plates are
available if required.