User's Manual
6
Quext IoT User Manual
Use AUTO mode to maintain the temperature between a high and low point
1� Press the dial once to highlight the control menu�
2� Turn the dial to highlight System mode , then press the dial�
3� Turn the dial to highlight AUTO on the System mode menu, then press the dial�
4� Turn the dial to select the temperature at the cool end of the range, then press the dial�
5� Turn the dial to select the temperature at the heat end of the range, then press the dial�
6� If SMART mode is active, turn the dial to select the number of hours (up to 24) for this setting to override the
scheduled operation, then press the dial�
Adjusting the temperature set point
When the thermostat is in COOL or HEAT mode, you can simply turn the dial to adjust the temperature set point�
When the thermostat is in AUTO mode, turn the dial to adjust the cool end of the range rst, press the dial to set
it, then turn the dial to adjust the heat end of the range and press the dial to set it�
Setting the fan mode
The fan has three operating modes: AUTO, ON, and CIRC�
To run the fan only while cooling or heating:
1� Press the dial once to highlight the control menu�
2� Turn the dial to highlight Fan , then press the dial�
3� Turn the dial to highlight AUTO on the Fan mode menu, then press the dial�
To run the fan continuously:
1� Press the dial once to highlight the control menu�
2� Turn the dial to highlight Fan , then press the dial�
3� Turn the dial to highlight ON on the Fan mode menu, then press the dial�
4� If SMART mode is active, turn the dial to select the number of hours (up to 24) for this setting to override the
scheduled operation, then press the dial�
Use HEAT mode to prevent the temperature from falling below a set point:
1� Press the dial once to highlight the control menu�
2� Turn the dial to highlight System mode , then press the dial to select it�
3� Turn the dial to highlight HEAT on the system mode menu, then press the dial�
4� Turn the dial to select the desired temperature, then press the dial�
5� If SMART mode is active, turn the dial to select the number of hours (up to 24) for this setting to override
the scheudled operation, then press the dial�