Use and Care Manual

RUST-OLEUM CORPORATION • 11 HAWTHORN PARKWAY • VERNON HILLS, ILLINOIS 60061 • TELEPHONE: [phone]
Form 3024
Published 12/99
PRODUCT DATA
Quick Color™ Sprays
DESCRIPTION A fast dry, VOC compliant all-purpose spray. A basic paint for a variety of quick jobs
around the house.
APPEARANCE Flat and Gloss topcoats and primer.
RECOMMENDED PRIMER 2857 Gray Primer
PHYSICAL PROPERTIES (Calculated values are shown and may vary slightly from the actual manufactured material)
RESIN TYPE Acrylic Modified Alkyd.
SOLVENTS Naphtha, Xylene, Acetone
VOLATILE ORGANIC COMPOUNDS Maximum 65%
PRACTICAL COVERAGE Approximately 6 sq. ft./can (.54 M
2
/can)
DRY TIMES @ 70°F (21°C) and 50% RH
Tack Free 30 minutes
Handle 1 hour
Recoat Within 1 hour or after 24 hours. (Primer can be topcoated anytime)
(Lower temperatures or high humidity will extend dry times)
DRY HEAT RESISTANCE 200°F (94° C)
SHELF LIFE 5 Years
PACKAGING 10 oz can
SURFACE PREPARATION Remove all dirt, grease, oil, salt or other contaminants by washing the surface with
detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully
dry.
Scrape and wire brush or power tool clean to remove loose rust, scale, and deteriorated
coatings. Scarify previously painted coatings or smooth surfaces to promote adhesion.
Test for compatibility with existing coating.
Use in properly ventilated area. Spraying can produce a fog that will travel. Protect
surrounding area, clothing and skin for overspray.
APPLICATION Apply only when air and surface temperatures are above 50°F (10°C) and humidity is less
than 85% to ensure proper drying. Use outdoors or in areas with good ventilation.
Apply two or more light coats a few minutes apart.