Instructions / Assembly

THE NEXT GENERATION IN FLOOD PROTECTION
TM
FLOOD BAGS & BARRIERS
Everything You Need to Know
How to Stack
How to Align Lengthwise
Stack rst 2 Barriers with wedge on
top of wedge & then a 3rd unit on
top for stable wall.
Brick & pyramid formation should
always be higher than water
Squish together to minimize seepage
Properly stagger with water ow direction
Note: For a solid base, bags
should be stacked in a 1:3 ratio.
For every 1ft of height needed,
extend the base by 3ft.
During rst
activation,
white gel
along stitching
is normal. Just wipe off.
Wedge*
**
* Place wider section of Barrier towards water, as the smaller section (wedge) prevents it from rolling.
**DO NOT want water moving in this direction causing seepage in between the Barriers.
Grows to
How to Use
Place the Bags/Barriers in the path
of oncoming ood water.
As they come in contact with water,
it will absorb through material &
start to swell.
Bags & Barriers reach their full
height of 3.5in in 10 mins if enough
water is present.
If a rush of water is expected or
you need to stack them, pre-soaking
them is recommended.
Not for use with Salt water.
Protect Your
Property
Activates
When Wet
No Sand
Needed
SAND
Item
Flood
Bags
Jumbo
Flood Bags
Flood Barriers
Activated
Size
24in x 12in
x 3.5in H
48 in x 12in
x 3.5in H
5ft: 5ft x 6.5in x 3.5in H
10ft: 10ft x 6.5in x 3.5in H
17ft: 17ft x 6.5in x 3.5in H
Activated
Weight
32lbs 64lbs
5ft: 34lbs
10ft: 68lbs
17ft: 116lbs
Absorbs 4gal 8gal
5ft: 4.25gal
10ft: 8.5gal
17ft: 14.5gal

Summary of content (2 pages)