FAQ

THE NEXT GENERATION IN FLOOD PROTECTION
TM
Are there any helpful tips to be aware of:
Tips:
 When lling, ll to desired height & try to guide
pockets of air toward the ll nozzle & out. This
helps provide ample room for water to travel in
case of depressions.
 When draining, remove cap & press down or
step on far end away from nozzle, this will guide
water out of nozzle. When able to be lifted,
lifting this far end & walking towards the nozzle,
will help speed draining time.
How do I use the Water Curb?
 To use the Water Curb, simply put in place
and ll with water.
How much water can a Water Curb divert?
 Water Curbs are designed as a water diversion
device and as such can divert endless streams
of water. Water Curbs are intended for
moderate use and are sufcient for moderate
rainfall or other sources of steady water streams
that need to be diverted.
Can multiple Water Curbs be used
together?
 Yes, to increase the length, overlap the Water
Curbs by a few inches in front or behind to
prevent water from seeping in between.
What happens if the water in my Water
Curb freezes?
 When Water Curbs are used in extreme cold
conditions, it is recommended that they be lled
to no more than 3/4 capacity. This will allow
for expansion if the water freezes. The cold
temperatures will not have any adverse affect
on the Water Curbs material or construction,
they can be continued to be used over and over.
Tip:
 The water in the Water Curb can be treated
with antifreeze to avoid freezing.
How do I store the Water Curbs when
I’m done?
 Simply remove the ller cap and drain the
water from the Water Curb and store in any
convenient location.
Are there any special care instructions?
 Yes, take care not to drag or place the Water
Curb over sharp or abrasive objects as they are
not immune to punctures.
In the event that a Water Curb punctures,
can they be repaired?
 Yes, a patch repair kit is recommended to
reseal the puncture.
Frequently
Asked Questions