Product Manual

TECHNICAL FABRIC SPECIFICATIONS
The technical specifications in the chart below are minimum requirements for all specified properties. These
specifications enable us to guarantee out durability standards, which are three times higher
than required. You have our assurance that in the majority of cases, our fabrics are much
more resistant than the specifications outlined below.
PVC Fabric
For models
WL-06, WL-14, WL-20 & WL-26
For models
WL-06, 14, 20, 26
For models
WL-39, 50, 60
Woven polyester scrim
Warp
40 kg/cm
245 lbs/in
Fill***
35 kg/cm
218 lbs/in
Warp
55 kg/cm
310 lbs/in
Fill***
50 kg/cm
275 lbs/in
Woven polyester scrim
For models
WL-50 and WL-60
Properties
Minimum Specifications Minimum Specifications**Certified
Yes
Minimum Specifications Minimum Specifications
**Certified
Yes
Yes
Yes
Yes
Yes
No
**Certified
Yes
Yes
Yes
Yes
Yes
No
-
Yes
Yes
Yes
Yes
No
No
Yes
-
Yes
Yes
Yes
Yes
No
No
**Certified
Weight
Base Fabric
Tension
resistance *
Tear resistance
Adhesion
Heat resistance
UV resistance
Flame resistance
Polyethylene
woven fabric
Properties
Weight
Base Fabric
Tension
resistance *
Tear resistance
Resistance to
cold temperature
UV resistance
Flame resistance
750 g/m² 22 oz yd²
-
610 g/m² 18 oz yd²
-
Warp
32 kg
72 lbs
Fill***
22 kg
49 lbs
Warp
34 kg/cm
210 lbs/in
Fill***
30 kg/cm
185 lbs/in
Warp
31 kg
68 lbs
Fill***
31 kg
68 lbs
Warp
80 kg/cm
490 lbs/in
Fill***
50 kg/cm
320 lbs/in
Warp
40 kg
88 lbs
Fill***
40 kg
88 lbs
Warp
1.5 kg/cm
8 lbs/in
-30º +70ºC -22º +160ºC
Fill***
1.5 kg/cm
8 lbs/in
/
-40ºC -40ºF
/
200 g/m² 6 oz yd²-
300 g/m² 9 oz
-
-40ºC -40ºF
/
Warp
45 kg
100 lbs
Fill***
35 kg
80 lbs
Warp
1.5 kg/cm
8 lbs/in
-30º +70ºC -22º +160ºC
Fill***
1.5 kg/cm
8 lbs/in
/
More than 80% strength
retention after 2000 hours
of exposure
Not applicable
More than 80% strength
retention after 2000 hours
of exposure
Not applicable
100% polyethylene
100% polyethylene
More than 80% strength
retention after 2000 hours
of exposure
Not applicable
More than 80% strength
retention after 2000 hours
of exposure
Not applicable
Lbs/in. = Pounds/inch = lbf
* Tension resistance or grab tensile
** Certified = tested according to recognized standards
*** Fill or Weft
yd² = square yard
g/m² = GSM
Warp
Fill
18.