Installation Guide

OCT-2021, Rev 12
13
925-478-8269 | www.quickmountpv.com | [e-mail]
©2020 by Quick Mount PV. All rights reserved.
Bonding Information
The Accessory Frame Bracket (AFB) is a UL 2703 Recognized product used to mount and electrically bond module level
power electronics (MLPE) that have been evaluated for use in combination with UL 1703 Listed Modules, as listed in the
above sections, and installed per the provided instructions.
The Accessory Frame Bracket and bonding pins are rated for multiple use and are location independent.
Bonding Method: The AFB electrically bonds the MLPE to the module frame with bonding pins that pierce both module
frame and MLPE brackets coatings when the serrated bracket attachment bolts are torqued to 15 -lbs. The system is to be
installed in accordance with the latest National Electrical Code, ANSI/NFPA 70. Any local electrical codes must be adhered
in addition to the national electrical codes. System maximum series fuse rating shall not exceed 25 Amps.
Fire Rating:
Use of Accessory Frame Bracket will not aect Fire Rating of the racking system.
Periodic Re-inspections:
If re-inspections yields loose components, loose fasteners, or any corrosion between components, components that are
found to be aected are to be replacement immediately.
Fuse Rating:
Maximum Series Fuse Rating = 40A
Miscellaneous Information
Product Marking
QMAFB
by QuickMount
Conforms to
UL STD 2703
QMAFB
Product Marking