Accessory Frame Bracket For mounting module level electronics to standard module frames Works with: Quick Rack™ Rail-Free System | Rooftop Racking Systems Ground Mounted Systems | Ballasted Systems RESPECT THE ROOF
ITEM NO. DESCRIPTION QTY. 1 ACCESSORY FRAME CLAMP, 40MM, 5005-H34, BRONZE 1 2 ACCESSORY FRAME BRACKET, 5052-H32, MILL 1 3 CAP SCREW, SERRATED FLANGE, HEX HEAD, 5/16"-18 X 3/4", UNC-2A, 18-8SS 1 ITEM 1: AVAILABLE IN 33MM, 35MM AND 40MM VERSIONS IN MILL AND BRONZE FINISHES 1 2 3 TITLE: QMAFB: ACCESSORY FRAME BRACKET UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV.
Accessory Frame Bracket | QMAFB Installation Instructions Installation Tools Required: PV wire clips, 1/2" socket and torque wrench. 1 In a standard landscape or portrait array, the Accessory Frame Bracket should be installed at least 5 inches from the edge of the module and at least 1 inch in from the edge of the module junction box.
UL2703 Compliance Requirements Evaluated and Approved Modules for use with the Accessory Frame Bracket All listed modules have a minimum of one frame section (long or short) that fit the following dimensional requirements: .500" max 33mm/35mm/40mm .625" min .03125" min/.09375" max 1.090" min - 1.
Approved Modules Cont’d Suniva Optimus & MV Series Black OPT XXX-60-4-1B0, Silver OPT XXX-60-4-100, MVX XXX-60-5-100, Black OPT XXX-60-4-1B1, Silver OPT XXX-60-4-101 Hanwha Solar HSL 60 & HSL 72 HSL60P6-PB-0-XXXT, HSL60P6-PB-0-XXXTW, HSL60P6-PB-0-XXXTB, HSL60P6-PB-4-XXXT, HSL60P6-PB-4-XXXTW, HSL60P6-PB-4-XXXTB, HSL60P6-PB-1-XXX, HSL60P6-PB-1-XXXB, HSL72S-4BB-1-XXXB Canadian Solar CS6P-XXXP, CS6P-XXXM, CS6X-XXXP, CS6P-XXXM All Black, CS6U-XXXP, CS6U-XXXM Renesola 156 Series JCXXXS-24/Bb, JCXXXF-24/Bb-b, JCXX
Evaluated and Approved Module Level Electronics for use with the Accessory Frame Bracket Approved Module Level Electronics SolarEdge Power Optimizer P300, P320, P400, P405, P600, P700 Grounding Information The Accessory Frame Bracket is used to mount and ground a module level electronic to a PV module that complies with UL 1703 when used with a module level electronic and PV module that has been evaluated for grounding and/ or mounting in compliance with the instructions provided.
BI 7.2.
RESPECT THE ROOF UL STD 2703 BI 7.2.3-37_1 925-478-8269 | www.quickmountpv.com | info@quickmountpv.com 2700 Mitchell Dr. | Walnut Creek, CA 94598 Aug-2016, Rev 11 ©2016 by Quick Mount PV. All rights reserved.
