Brochure

Aug-2016, Rev 11BI 7.2.3-37_1
Grounding Information
The Accessory Frame Bracket is used to mount and ground a module level electronic to a PV module that complies
with UL 1703 when used with a module level electronic and PV module that has been evaluated for grounding and/ or
mounting in compliance with the instructions provided.
Grounding pins within the Accessory Frame Bracket components are multiple use bonding/grounding device.
Grounding Method: Accessory Frame Bracket Assembly grounds the module level electronic with grounding pins that
pierce the module frame and module level electronics case when the bracket attachment bolts are torqued to 15 -lbs
using the provided serrated flange bolt. The module frame must be grounded by a UL2703 racking system, e.g. Quick Rack
rail free racking system from Quick Mount PV. The system is to be installed in accordance with the latest National Electrical
Code, ANSI/NFPA 70, including NEC 250: Grounding and Bonding, and NEC 690: Solar Photovoltaic Systems. Any local
electrical codes must be adhered in addition to the national electrical codes. System maximum series fuse rating shall not
exceed 20 Amps.
Miscellaneous Information
Fire Rating:
Use of Accessory Frame Bracket will not aect Fire Rating of the racking system.
Periodic Re-inspections:
If re-inspections yields loose components, loose fasteners, or any corrosion between components, components that are
found to be aected are to be replacement immediately.
Load Rating:
Maximum Series Fuse Rating = 20 Amps
Product Marking:
Evaluated and Approved Module Level Electronics for use with the
Accessory Frame Bracket
Approved Module Level Electronics
SolarEdge Power Optimizer
P300, P320, P400, P405, P600, P700
QMAFB by Quick Mount PV®
Conforms to UL STD 2703
Patent Pending
Made in USA