UL 2703 Recognized Component CDR

Report No. 102066127MPK-003
Quick Mount PV
Page 2 of 35
Issued: 30-Jun-2015
Revised: 27-Feb-2018
Product
Brand name
Models
Model Similarity
QMAFB Accessory Frame Bracket and QMAFBU Accessory Frame Bracket.
The product covered by this report is the “Accessory Frame Bracket” from Quick Mount PV.
The Accessory Frame Bracket is used to mount module level electronics to standard PV
module frames. The Accessory Frame Bracket provides a mounting option for the module level
electronic to the module frame for Quick Mount PV's Quick Rack rail-free solar mounting
system, as well as other rail-less racking systems, ground-mounted and ballasted systems.
The Accessory Frame Bracket is used to mount and bond a module level electronic to a PV
module that complies with UL 1703 when used with a module level electronic and PV module
that has been evaluated for grounding and/ or mounting in compliance with the instructions
provided.
Accessory Frame Bracket Assembly bonds the module level electronic with bonding pins that
pierce the module frame and module level electronics case when the bracket attachment bolts
are torqued to 13 ft-lbs using the provided serrated flange bolt. The Accessory Frame Bracket
assembly is made from 5000 series aluminum, including 18-8 stainless steel hardware with 316
stainless steel bonding pins. The module frame must be grounded by a UL2703 racking
system, e.g. Quick Rack rail free racking system from Quick Mount PV. The system is to be
installed in accordance with the latest National Electrical Code, ANSI/NFPA 70, including NEC
250: Grounding and Bonding, and NEC 690: Solar Photovoltaic Systems. Any local electrical
codes must be adhered in addition to the national electrical codes. System maximum series
fuse rating shall not exceed 20 Amps.
The Accessory Frame Bracket have only been tested for bonding only and no mechanical load
was performed.
Description
2.0 Product Description
Accessory Frame Bracket installed using QMAFBU Installation Instructions, Feb-2018, Rev 2
Accessory Frame Bracket
QMAFB and QMAFBU are very similar in construction, the only difference is that the QMAFBU
uses a Universal Accessory Frame Clamp ( part number 3225).
ED 16.3.15 (20-Apr-17) Mandatory