Accessory Frame Bracket | QMAFB For mounting module level electronics to standard module frames Works with: Rail-Free System | Rooftop Racking Systems Ground Mounted Systems | Ballasted Systems
Accessory Frame Bracket | QMAFB Installation Instructions Installation Tools Required: PV wire clips, 1/2" socket and torque wrench. 1 In a standard landscape or portrait array, the Accessory Frame Bracket should be installed at least 5 inches from the edge of the module and at least 1 inch in from the edge of the module junction box.
UL2703 Compliance Requirements Tested and/or Evaluated PV Modules and Module Level Power Electronics (MLPE) for use with the Accessory Frame Bracket are included in subsequent pages. In addition, please verify that all listed modules have a minimum frame cross section (long or short) that fits the following dimensional requirements: 15 mm max 30mm min 0.8 -2.
List of UL Tested and/or Evaluated PV Modules The Accessory Frame Bracket (AFB) is a UL 2703 Recognized product used to mount and electrically bond module level power electronics (MLPE) that have been tested and/or evaluated for use in combination with UL 1703 or UL 61730 Listed Modules and with the included instructions. Unless otherwise noted, “xxx” refers to the module power rating and both black and silver frames are included in the certification.
Manufacturer Canadian Solar CertainTeed Model Number Canadian Solar modules with 30, 35 and 40 mm frames CSbY-xxxZ Where "b" can be 1, 3 or 6; "Y" can be H, K, L, N, P, U, V, W, X or Y; and "Z" can be M, P, MS, PX , M-SD, P-AG, P-SD, MB-AG, PB-AG, MS-AG, or MS-SD CertainTeed modules with 35 and 40mm frames CTxxxYZZ-AA Where "Y" can be M, P, or HC; "ZZ" can be 00, 01, 10, or 11; and "AA" can be 01, 02, 03, 04 or 06 CSUN Csun modules with 35 and 40 mm frames YYxxx-zzAbb Where ”YY” is CSUN or SST; ”zz” i
Manufacturer Hanwha Solar Hanwha Q CELLS Heliene HT-SAAE Hyundai Itek JA Solar Model Number Hanwha Solar modules with 40, 45, and 50 mm frames HSLaaP6-YY-1-xxxZ Where ”aa” can be either 60 or 72; ”YY” can be PA or PB; and ”Z” can be blank or B Hanwha Q CELLS Modules with 32, 35, 40, and 42mm frames aaYY-ZZ-xxx where "aa" can be Q. or B.; "YY" can be PLUS, PRO, PEAK, LINE PRO, LINE PLUS, PLUS DUO or PEAK DUO; and "ZZ" can be G3, G3.1, G4, G4.1, L-G2, L-G2.3, L-G3, L-G3.1, L-G3y, L-G4, L-G4.
Manufacturer Jinko Kyocera LG Longi Mission Solar Mitsubishi Model Number Jinko modules with 35 and 40 mm frames JKMYxxxZZ-aa Where "Y" can either be blank or S; "ZZ" can be M, P, or PP; and "aa" can be blank, 60, 60B, 60H, 60L, 60BL, 60HL, 60HB, 60HBL, 6HBL-EP, 60-J4, 60B-J4, 60B-EP, 60(Plus), 60-V, 60-MX, 6RL3, 6RL3-B, 6TL3-B, 7RL3-V, 7RL3-TV, 72, 72B, 72-J4, 72B-J4, 72(Plus), 72-V, 72HV, 72L-V, 72HL-V, 72-MX, 72H-BDVP, 72HL-TV, or 72HL-V-MX3 Kyocera Modules with 46mm frames KYxxxZZ-AA Where ”Y” ca
Manufacturer Panasonic (EverVolt) Peimar Philadelphia Solar Phono Solar Recom REC Solar Renesola Model Number Panasonic modules with 30 mm frames EVPVxxxA Where "A" can be blank or K Peimar modules with 40 mm frames SbxxxYzz Where ”b” can be G, M or P; “Y” can be M or P; and “zz” can be blank, (BF), or (FB) Philadelphia modules with 35 and 40 mm frames PS-YzzAA-xxx Where ”Y” can be M or P; ”zz” can be 60 or 72; and ”AA” can be blank or (BF) Phono Solar modules with 35, 40, and 45 mm frames PSxxxY-ZZ
Manufacturer Seraphim Energy Group Seraphim USA Sharp Silfab Solaria Solarcity (Tesla) SolarTech Model Number Seraphim modules with 35 and 40 mm frames SEG-aYY-xxxZZ Where ”a” can be blank, 6 or B; ”YY” can be blank, MA, MB, PA, or PB; and ”ZZ” can be blank, BB, BG, BW, HV, WB, WW, BMB, BMA-HV, BMB-HV Seraphim modules with 35, 40 and 50 mm frames SRP-xxx-YYY-ZZ Where "xxx" is the module power rating; and "YYY" can be 6MA, 6MB, 6PA, 6PB, BMD, 6QA-XX-XX, and 6QB-XX-XX; ZZ is blank, BB or HV Sharp modu
Manufacturer Suniva Sunpower Model Number Suniva modules with 35, 38, 40, 46, and 50 mm frames OPTxxx-AA-B-YYY-Z MVXxxx-AA-B-YYY-Z Where ”AA” is either 60 or 72; ”B” is either 4 or 5; ”YYY” is either 100,101,700,1B0, or 1B1; and ”Z” is blank or B Sunpower standard (G3 or G4) or InvisiMount (G5) 40 and 46 mm frames SPR-Zb-xxx-YY Where ”Z” is either A, E, P or X; “b” can be blank, 17, 18, 19, 20, 21, or 22; and “YY” can be blank, BLK, COM, C-AC, D-AC, E-AC, BLK-E-AC, G-AC, BLK-C-AC, or BLK-D-AC Sunspark
Manufacturer Waaree Winaico Yingli ZN Shine Model Number Waaree modules with 40mm frames WSyy-xxx where ”yy” can be blank, or M Winaico modules with 35 and 40 mm frames Wsy-xxxZa Where ”y” can be either P or T; ”Z” can be either M, P, or MX; and ”a” can be blank or 6 Yingli modules with 35 and 40 mm frames YLxxxZ-yy Where "Z" can be D or P; "yy" can be 29b, 30b, 34d, 35b, 36b or 40d ZN Shine modules with 35mm frames ZXMY-AAA-xxx/M Where "Y" can be 6 or 7, "AAA" can be 72, NH120 or NH144 11 OCT-2021,
Tested and/or Evaluated Module Level Power Electronics for use with the Accessory Frame Bracket Approved Module Level Power Electronics Enphase M250-72, 250-60, M215-60, C250-72, S230, S280, IQ 6, IQ 6+, IQ IQ7, IQ 7A, IQ 7+, IQ 7X, IQ PD , Q Aggregator SolarEdge M1600, P300, P320, P340, P370, P400, P401, P405, P485, P505, P600, P700, P730, P800p, P800s, P801, P850, P860, P950, P960, P1100 12 Oct -2021, Rev 12
Bonding Information The Accessory Frame Bracket (AFB) is a UL 2703 Recognized product used to mount and electrically bond module level power electronics (MLPE) that have been evaluated for use in combination with UL 1703 Listed Modules, as listed in the above sections, and installed per the provided instructions. The Accessory Frame Bracket and bonding pins are rated for multiple use and are location independent.
