Solar Mounting Solutions Curved & Flat Tile Roofs
QBlock Tile Replacement Mounts ® T he Tile Replacement Mount provides a fast and easy way to install solar on tile roofs while protecting against water intrusion. Simply remove the tile and replace it with the Tile Replacement Mount. Works with all standard curved and flat tile roofs, and all standard rail-based racking systems. Flashed at both the deck and top levels, the Tile Replacement Mount is fully engineered to meet code requirements and industry best practices.
EPDM waterproofing seal raised above flashing and rainwater Aluminum block engineered to support load with standard mount spacing Aluminum flute fused to flashing Tile Replacement Mount Products Tile Replacement Mount for S-shaped Curved Tile Profiles Universal base mount with integrated sub-flashing, 3.25" post and preformed aluminum flashing replaces S-shaped tile.
QHook Tile Mounts ® QMUTM Q uick Hook®, featuring QHook technology, provides a fast and simple way to install solar on tile roofs. Quick Hook is designed for use with side-mounted or bottom-mounted rails, with multiple height options for use with a variety of tiles. Optional Tile Replacement Flashings work with Flat, S and W-shaped tile profiles to speed installation. The flashing replaces a tile, so there’s no messy, time-consuming tile grinding or cutting required.
Preformed aluminum flashing included Multiple mounting hole options for solid attachment to rafter Cantilevered hook engineered for strength Hook slides in base slot to enable optimal positioning QHook Products Quick Hook® SS/LS – For Side Mount Rails Standard height & low height hooks for side-mounted rails. Preformed flashing and adjustable hook for simple, clean installation. Quick Hook® SB/LB – For Bottom Mount Rails Standard height & low height hooks for bottom-mounted rails.
QBase Tile Mounts ® T he QBase has a super-strong cast aluminum foundation with four gussets to support standoff posts for tile from 4.5 to 7 inches. The QBase Universal Tile Mount and the QBase Standard Flat Tile Mount are complete double-flashed mounting kits. Both flashings feature an aluminum cone, with no seams to fail in extreme weather. Ideal for both retrofit and new roof installations.
Stainless steel rack attachment hardware EPDM rubber seals top of post Detachable post fastens to QBase with machine bolt Four gussets substantially improve load capacity Choice of 2- or 4-bolt mounting QBase Products QBase Universal Tile Mount Heavy-duty tile mount with both deck- and tile-level flashing. The secondary top flashing is malleable, so it works equally well for both curved and flat tile roofs.
Conduit Mount for Tile - For Curved & Flat Tile Roofs The Conduit Mount for Tile is designed to lift electrical conduit off the roof to protect wiring from overheating. The Conduit Mount works with flat or curved tile and does not require tile cutting or grinding. All stainless steel hardware included.
