Manualshelf

Installation Guide

ManualsBrandsQuick Mount PV ManualsSolar & Wind PowerFlashing, Conduit Penetration Flashings, for Tile, Mill Finish
1234
Jun-2019, Rev 5BI 7.2.3-36
3
2
1
2
6.50
9.00
18.00
18.00
4.25
2.56
THIS EDGE TOWARDS ROOF RIDGE
9.00
2.63
2.42
4.50
B
4.50
9.00
3.50
9.00
4.31
2.56
THIS EDGE
TOWARDS
ROOF RIDGE
DETAIL B
SCALE 1 : 4
CUT HERE FOR 3/4" CONDUIT
CUT HERE FOR 1" CONDUIT
APPLY EPDM COMPATIBLE SEALANT
WHERE CONDUIT CONTACTS COUNTER FLASHING
NOTES APPLY TO UPPER AND
LOWER COUNTER FLASHINGS
TOP ID FOR 1/2" CONDUIT
SUB FLASHING
ITEM 1
NOTES:
1. AVAILABLE IN MILL FINISH, AND BRONZE
ANODIZED FINISH.
2. FLASHINGS MAY BE SPUN, OR PRESSED
3. ITEM 1 MATERIAL THICKNESS:
.020" SPUN, .032" PRESSED
ITEM
NO.
DESCRIPTION
QTY.
1
SUB-FLASHING, CONE, 9"X9"X.020"/.032", 3003 AL, MILL
1
2
COUNTER FLASHING, CONDUIT, 1/2", 3/4", 1", EPDM
RUBBER
2
3
FLASHING, CONE, 18"X18"X.032", 3003 AL, MILL
1
6
DO NOT SCALE DRAWING
SHEET 1 OF 2
AAP
SCALE: 1:8
WEIGHT:
REV
A
SIZE
TITLE:
DATE:
DRAWN BY:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
1/8
TWO PLACE DECIMAL
.19
THREE PLACE DECIMAL
.094
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED.
COPYRIGHT © 2019 QUICK MOUNT PV
5
4
3
2
1
UNLESS OTHERWISE SPECIFIED:
1.32
QMCPT: CONDUIT PENETRATION
FLASHING, TILE
6/13/2019
Tile Conduit Penetration Flashing | QMCPT
Drawing 1

Summary of content (4 pages)