Part #s: 109281, 109879, 110809 Center Height: 90 inches Foot Print: 94 total square feet Hub-to-Hub: 140 x 140 inches Weight: 34 lbs. Model #s: 9281, 9879, 10809 Instruction #: 104665 WARRANTY INFORMATION Please contact customer service directly at the E-mail or phone number listed below for any quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. ** Warranty cannot be honored without an original, dated receipt.
SAFETY INSTRUCTIONS Please fully understand and follow all safety instructions outlined in this booklet. Failure to do so could result in severe injury. WARNING • Do not use open flame heaters in your screen tent. Injury or death may result from fire if tent fabric is exposed to open flame. • Tent fabric will melt when contact is made with hot surfaces (i.e., heaters). Tent fabric is not fireproof. Fabric will burn with extended exposure to open flame. Do not use open flame products inside tent.
SET UP INSTRUCTIONS CONTINUED Step 1: Unzip the storage bag completely and remove the shelter. Use care not to misplace the instructions and the stake and rope pouch. It is advised to store your stakes, ropes and pouch in the carry bag until they’re needed. Step 2: Pick the tent up directly from the carry bag and stand it on the center metal hub.
Step 7 (optional): Insert the vertical rods on either side of the screen tent’s door. Remove the Velcro retaining loop securing the pole to the adjacent wall. Once freed, install one end of the rod into the other’s end to make it one long rod. Place the bottom of the rod in the pocket located at the bottom of the panel directly below where the rods are mounted. Secure the rod with the Velcro loop. Repeat on the other side. It is recommended to use these if any wind is present.
TAKE DOWN INSTRUCTIONS Step 1: Remove all the stakes from the interior and exterior of the tent. Step 2: If used, remove the vertical door support rods from pockets at the bottom of the panel, pull apart, and refasten them with the Velcro straps located diagonally on the panels next to each side of the door. (Photo 1) Photo 1 Step 3: Push in on the walls in from the outside of the tent to collapse the wall panels. Do this to all wall panels until the tent is collapsed.
SAFETY INFORMATION Please fully understand and follow all safety instructions as outlined. Failure to do so could result in severe injury or death. Do NOT use open flame heaters in your screen tent. Injury or death may result from fire if tent fabric is exposed to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets CPAI-84 specifications. Application of any foreign substance may render the flame retardant properties ineffective.
FREQUENTLY ASKED QUESTIONS Q: How do I set up my screen tent? A: Please review the set up and take down instructions in your owner’s manual or go to www.QuickSetShelters.com to watch an instructional video on the proper and simplest way to set up and take down a screen tent. Videos can be found under your shelter’s model on our website. Q: Do you offer any accessories for Quick-Set Screen Tents? A: Yes! We offer wind panel accessories that are designed to keep the wind and sun away.