MSDS

Flash Point
No information available
Evaporation Rate: (n-butyl acetate =1)
< 1
Flammability (solid, gas)
No information available
Flammability Limit in Air
Upper flammability limit
No information available
Lower flammability limit
No information available
Vapor Pressure
No information available
Vapor Density
No information available
Specific Gravity 1.025
Relative Density (lbs./gal.)
8.5
Solubility In Water Miscible
Solubility in other solvents
No information available
Partition coefficient: n-octanol/water
No information available
Autoignition Temperature
No information available
Decomposition Temperature
No information available
Viscosity
No information available
Other Information
No information available
Reactivity
No information available
Chemical Stability Stable under recommended storage conditions.
Possibility of hazardous reactions None with normal use
Hazardous Polymerization Does not occur
Conditions to avoid
No information available
Incompatible materials Strong acids. Strong bases. Strong oxidizing agents.
Hazardous Decomposition Products None known.
Information on likely routes of exposure
Inhalation Specific test data for this product is not available.
Eye contact Specific test data for this product is not available. May cause temporary
eye irritation.
Skin contact Specific test data for this product is not available. Prolonged exposure may
cause minor irritation.
Ingestion Specific test data for this product is not available.
Component Information
Chemical Name
Diethylene glycol monoethyl ether
111-90-0
Tributoxyethyl Phosphate
78-51-3
Symptoms related to the physical, chemical and toxicological characteristics
Eye irritation and redness with overexposure. Skin irritation with prolonged exposure.
[Rat]: 3,000 mg/kg
-
-
Section 10 - Stability and Reactivity
Oral LD50
Dermal LD50
[Rat]: 6,031 mg/kg
[Rabbit]: 9,143 mg/kg
Inhalation LC50
[Rat]: > 5.24mg/l - 8 hr.
Section 11 - Toxicological Information
Material Name: Quick Shine High Traffic Hardwood Floor Luster Page 5 of 7