MSDS

Section 6 - Spill or Leak Procedures
Spill Procedures: Floors will become slippery. Avoid walking in product and ventilate
area. Mop up or otherwise absorb and hold disposal. Avoid discharge
to sewer or open waterways.
Section 7 - Handling And Storage:
Precautions To Be Taken In Handling And Storage: Store in a cool dry area in a closed
container. Avoid temperatures above 350F.
KEEP OUT OF THE REACH OF CHILDREN
Section 8 - Special Protection Information
Respiratory Protection:
No special requirements
Ventilation: Normal ventilation.
Protective Gloves: Rubber, Neoprene, Plastic recommended when excessive
contact is expected.
Eye Protection Safety glasses or eye goggles recommended when excessive
contact is expected.
Other Protection: Not Necessary if product is used as directed.
Hygienic Practices: Wash thoroughly after handling
Section 9 - Physical Data
Appearance: Opaque
Color: Light brown
Odor: Acrylic
Physical State: Liquid
Solubility In Water: Miscible in water
pH: 7.5 - 8.5
Boiling Point: 212F
Evaporation Rate: (vs. H20) <1
Specific Gravity: (H20=1) 1.025
Relative Density (lbs/gal.) 8.5
Vapor Density: (Air=1) Like Water
Vapor Pressure (mmHg): Not available
Evaporation Rate: (vs. Butyl Acetate)
<1
Section 10 - Reactivity Data
Stability: Stable
Hazardous Polymerization: None
Hazardous Decomposition: Not known
Incompatibility: Strong oxidizing agents
Material Name: Quick Shine High Traffic Hardwood Floor Luster Page 2 of 4