Specifications

SubCompact Board GENE-QM67
Chapter 2 Quick Installation Guide 2 - 7
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label Function
JP2 LVDS Port 2 Operating VDD Selection
JP3 LVDS Port 1 Backlight Inverter VCC Selection
JP4 LVDS Port 2 Backlight Inverter VCC Selection
JP5 LVDS Port 1 Operating VDD Selection
JP6 LVDS Port 1 Backlight Lightness Control Mode Selection
JP7 LVDS Port 2 Backlight Lightness Control Mode Selection
JP8 COM2 Pin8 Function Selection
JP9 Front Panel Connector
JP10 Touch Screen 4/5/8-wire Mode Selection
JP11 Clear CMOS Selection
JP12 AT/ATX Power Supply Mode Selection
2.5 List of Connectors
The board has a number of connectors that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's connectors:
Label Function
CN1 LVDS Port 1 Inverter / Backlight Connector
CN2 External +12V Input
CN3 USB2.0 Port 7 and 8
CN4 USB2.0 Port 5 and 6
CN5 USB2.0 Port 3 and 4
CN6 External +5VSB Input
CN7 LVDS Port 2 Inverter / Backlight Connector