Material Safety Data Sheet (MSDS)

QUICKCABLE
Material Safety Data Sheet (MSDS)
Description: Heat Shrink Tubing Part Number: 5611-5619, 5657-5673, 506701-506714
SECTION I
CONTACT INFORMATION
Date: 07/2013
Quick Cable Corporation
3700 Quick Cable Drive, Franksville, WI 53126
Telephone: [phone]
Emergency Telephone: INFOTRAC 1-800-535-5053 Quick Cable Product I.D.: 5611-5616, 5657-6671
SECTION II
HAZARDOUS INGREDIENTS
*This product is a manufactured article and, as such, is exempt from the hazardous products act.
**Overheating to temperatures above 200ºC for long periods of time may cause the release of irritating and toxic fumes.
SECTION III
PHYSICAL/CHEMICAL CHARACTERISTICS
Physical State: Solid
Odor and Appearance: Plastic tube, almost odorless, with adhesive
lining
Odor Threshold (ppm): N/A
Vapor Pressure (mmHg): N/A
Vapor Density (air=1): N/A
Evaporation Rate: N/A
Boiling Point: N/A
Freezing Point: N/A
Melting Point: N/A
pH: N/A
Specific Gravity (H2O=1): 1.34-.05
Coefficient: N/A
Oil Distribution: N/A
Solubility in Water: Insoluble
SECTION IV
FIRE AND EXPLOSION HAZARD DATA
Flammability Class: N/A LFL: N/A
Extinguishing Media: Water spray, Dry chemical, Foam, Carbon Dioxide UFL: N/A
Flash Point: N/A
SECTION V
REACTIVITY DATA
Stability: Stable
Conditions to Avoid: Decomposes at elevated temperatures
Hazardous Decomposition Products: May produce oxides of carbon, sulphur, nitrogen, acetic acid, antimony and hydrogen halides,
acid aldehydes, & vinyl acetate
Hazardous Polymerization: None
Incompatibility: Strong oxidizers
SECTION VI
HEALTH HAZARD DATA
Primary Routes of Exposure: None Irritancy of Material: Mild
Skin Contact: No unusual dermatitis hazard expected. Hot adhesive can cause burns Sensitizing Capability: No
Skin Absorption: None Carcinogenicity of Material: No
Eye Contact: Mechanical Irritation Reproductive Effects: No
Inhalation: None Teratogenicity: No
Ingestion: Low toxicity expected Mutagenicity: No
Effects of Acute Exposure: See Above Synergistic Materials: No
Effects of Chronic Exposure: None Known
First Aid Procedures: Eyes: Flush with water for 5 minutes; Skin: In the event of a burn with hot adhesive, immerse the affected part
in clean, cold, water and seek medical attention. Do not pull off adhesive; Inhalation: If exposed to fumes/gases from overheating, or
burning, remove to fresh air and seek medical advice; Ingestion: Low toxicity expected.