User manual

Transponder Access Control Kit
Version: 1.0 2
Status Indication
Operation Instruction
1. Enter Program mode
Press ‘ENT” 4 times → input password “123456” → press “ENT” to save (enter the program
mode successfully)
 “123456” is default password.
 If entering the program mode successfully, the buzzer will make two short sound “di di”,
otherwise, make a long sound “di”.
2. Function setup
(All the following steps should begin with Entering Program Mode)
(1) Key “0”: modify program password
Press “0” → input new password → press “ENT” → input the new password again → press
“ENT” → press “9” to exit
 If add successfully, the buzzer will make two short sound “di di”, otherwise, make a
long sound “di”.
 The password is 6-digits one.
Instruction
Red light
Green light
Buzzer
Working
On
Program mode
flash
Program mode sub-menu
On
Presenting unregistered card
On
Make long sound “di”
Presenting registered card&
door open
‘On’ time be identical
with door open
Make two short sound “di di”
After Presenting the card and
need to input the passwords
Red light and green light are at
interval flash
Card and password mode
Flash every
0.5 second
Password mode
Flash every 1
second
Keyboard
Making one short sound “di”
Successful Setting
Making two short sound “di di”
Failure Setting
Making a long sound “di”
Invalid inputting
Making a long sound “di”
Alarm
Continuous sound “di di di
di…”