Owner`s manual

28 SALSA M
5.9.5 Manual Articulating / Elevating Legrest (ALR/
ELR)
To elevate:
Pull the legrest upwards and stop at the desired height.
The legrest will automatically lock in the chosen position.
To lower:
Push the release lever slowly forward. The legrest will lower
the angle. As soon as you release the lever, the legrest will
be locked in the current position, (Fig.5.46).
WARNING!
Keep hands clear of the adjustment mechanism between
the frame and the movable parts of the legrest while
elevating or lowering the legrest.
5.9.6 Powered Elevating or Articulating Legrest
(Fig. 5.47)
NOTE: Both legrests can be operated simultaneously.
VR2 Control:
The actuator buttons can operate any factory approved
actuator. Operation is dependent on what options are fitted
to your wheelchair. To operate the legrests, seat tilt, seat
lift or back rest recline.
• Push one of the actuator buttons that has the seat icon
on it to select actuator mode
• Operate the joystick left or right to select the actuator
required (actuator 1 or actuator 2). Selection is indicated
via the lighting of the red LED adjacent to the desired
actuator button.
• Operate the joystick in the forward or rearward direction
to move the leg rest/seat lift/tilt or recline up or down.
• Release the joystick when the desired angle is
reached.
• To return to drive mode press the actuator button again.
(Fig 5.48)
Once the leg rest is fully lifted or in its lowest position do
not hold the joystick in its operat ing position as this could
damage the actuator.
R-net Control
Please refer to your R-net Owner’s Manual for
details.
LEVER
Fig. 5.46
Fig. 5.47