Owner`s manual
62 SALSA M
SALSA M
Parts in the battery box, (Fig.12.22):
Plastic battery box cover for 2 x 12V batteries.•
2 x battery looms with fuse and ring terminals.•
Battery link harness with red and grey connectors.•
Accessing the Batteries
Locate & loosen the 2 hand wheels at the front of the •
power base, (Fig.12.23).
Pull the spring loaded catch, (Fig.12.24).•
Carefully tilt the seat back, (Fig.12.25). •
Support the seat with the seat stay, (Fig.12.25). •
Ensure the plastic cap, clips over the end to secure •
the seat.
The Battery Cover is secured by 6 plastic rivets. Use a •
at blade screw driver to lift out the rivets.
Lift the Battery Cover clear. •
Disconnect the GREY plug on the front battery. •
Lift the front battery out using the lifting straps pro-•
vided.
Disconnect the GREY plug on the rear battery, •
(Fig.12.26).
Lift the rear battery out using the lifting straps pro-•
vided, (Fig.12.27).
Peel back 1 cover and using 2 x 13.0mm spanners, •
undo & remove the terminal bolt. Repeat for the other
terminal/battery, (Fig.12.28).
On retting, • the battery terminals must be covered
after connection with the caps provided on the cable,
(Fig.12.29).
Fig.12.23
Fig.12.24
Fig.12.25
Fig.12.26
Fig.12.27
Fig.12.28
Fig.12.29