Owner`s manual

66 SALSA M
Model: Quickie Salsa (RWD)
13 Specification sheets (EN 12184 & ISO 7176-15)
Manufacturers (Europe):
Sunrise Medical GmbH+Co.KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Deutschland
Maximum occupant mass
(test dummy mass): 140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and control systems
for electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in accordance
with ISO 7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified as
a Class B power chair
ISO7176-15 Min. Max. Comments
Overall length (with legrest) 1100 mm 1140 mm 70° hanger
Overall width 580 mm 610 mm 12” / 14” wheels
Total mass (w. batteries) 114.5 kg 160 kg without Balle/with Balle lift & tilt
Mass of the heaviest part - 18.5 kg Heaviest removable part
Static stability downhill - > 20° 0° tilt/0° recline/40 cm deep & 50
cm seat height
Static stability uphill - 10.6° 9° tilt/16° recline& 45 cm seat
height
Static stability sideways - 15.2° 0° tilt/0° recline/40 cm deep & 50
cm seat height
Energy consumption (max. range) - 32 6 kph motor and 100 kg user
(ISO7176-4)
Dynamic stability uphill - 8 ° 9° tilt/16° recline &max. seat
height (not with balle)
Obstacle climbing (with kerb climber) 85 mm 100 mm
Max. speed forward 6 kph 10 kph 6 kph motor & 12.5” wheels/ 10
kph motor & 14” wheels
Min. brake distance from max. speed - - Dep. programming
Seat plane angle 0° 9° mechanical, 3° increments
Effective seat depth 406 mm 508 mm 25 mm increments
Effective seat width 406 mm 508 mm 25 mm increments
Seat surface height at front edge 375 mm 520 mm 12” wheels / 385 mm 14” wheels
Backrest angle -4° 16° mechanical, 4° increments
Backrest height 457 mm 508 mm 25 mm increments
Footrest to seat distance 330 mm 505 mm
Leg to seat surface angle 110° -
Armrest to seat distance 230 mm 305 mm
Front location of armrest structure 350 mm 425 mm
Min. turning radius 850 mm 910 mm 70° hanger
Nominal battery voltage 24V -
Battery cut-off voltage 16V -
Battery fusible links - - 150A in line fuse on each battery
Quickie Direct Actuator Control Box
fusible link
- - 15A AST Mini Blade
Mass of the test dummy - 140 kg
EN 12184 Min. Max. Comments
Max. kerb height 85 mm 100 mm with kerb climber
Ground clearance 70 mm 80 mm 12” / 14”
Turning space 1200 mm -
Speed control operation force - 2N
Direction control operation force - 1N
Operating temperature: - 25°C to 50°C
Storage temperature: -40°C to 65°C
Moisture resistance: IPx4
No restrictions on humidity and air pressure