Owner`s manual

22 Quickie SALSA
ENGLISH
6.8 Seat Depth Adjustment (Fig. 65 - 67)
1. Remove the 5mm depth adjustment bolts from both sides of
the seat.
2. Slide the rear backrest and armrests into the desired seat
depth position. Reference seat depth position patterns (A)
3. Replace both sets of depth adjustment bolts. (Use 20 N/m
or 177 in/lb of torque.)
6.9 Backrest Angle Adjustment (Fig. 68 - 70)
1. Remove the 5mm backrest bracket index bolts (A) on both
sides of the backrest. Loosen the 5mm backrest bracket pivot
bolts (B) on both sides of the backrest.
NOTE– The index bolt (A) may be in a different starting position
than shown below.
2. Tilt the backrest assembly forward or backward to the
desired angle. See angle configurations below.
3. Reinsert and tighten both backrest bracket index bolts and
bracket bolts (A & B). (Use 20 N/m or 177 in/lb of torque.)
NOTE– The figures below represent the 8°angle.
6.10 Back Height Adjustment (Fig. 71 - 81)
1. Begin by removing the upholstery cover.
Fig. 65
Fig. 66
Fig. 67
Fig. 68
Fig. 69
Fig. 70
Fig. 71