Owner`s manual

Quickie SALSA 23
ENGLISH
2. Loosen the upholstery straps. It is not necessary to remove
the upholstery.
3. Remove the top upholstery screws. The upholstery can
now be moved and vertically compressed to provide access to
the hidden Phillips-head bolts.
4. Remove the 4mm towel bar bolts and the towel bar.
NOTE– This step is not necessary in every case. If the push
handles are high enough, the towel bar bolts might not thread
into the push handle tubes. To test, skip this step and move to
Numbers 5 and 6. If the towel bar does not impede movement of
the push handles, the towel bar may be left intact.
5. Remove the 4mm backpost adjustment bolts.
6. Move both backposts to the desired height.
7. Replace the backpost adjustment screws. (Use 10 N/m or
88.5 in/lb of torque.)
8. If removed in Number 4, replace the towel bar and the towel
bar bolts. (Use 10 N/m or 88.5 in/lb of torque.)
NOTE– The towel bar may be repositioned at this point as well.
9. Replace both top upholstery bolts. Ensure the bolts thread
through the top upholstery eyelets (A).
Fig. 72
Fig. 73
Fig. 74
Fig. 75
Fig. 76
Fig. 77
Fig. 78
Fig. 79