Instructions / Assembly
Table Of Contents
- QuickJack Manual
 - Table of Contents
 - Introduction
 - Shipping
 - Safety
 - Components
 - Accessories
 - Specifications
 - Frequently Asked Questions
 - Setup Checklist
 - Setup
- Setup Safety Rules
 - Tools
 - Selecting a Site
 - Unpacking
 - Clearances
 - QuickJack Assembly Kit
 - Air and Hydraulic Cylinders
 - Installing the Hydraulic Elbow Fittings
 - Preparing the Short Hydraulic Hoses
 - About Quick-Connect Fittings
 - Routing the Short Hydraulic Hoses
 - Preparing and Connecting the Long Hydraulic Hoses
 - Pressurizing the Air Cylinders
 - Find a Location for the Power Unit
 - Installing the Hydraulic Fittings on the Power Unit
 - Connect the Power Unit to a Power Source
 - Filling the Hydraulic Fluid Reservoir on the Power Unit
 - Check the Breather Valve
 - Connect the Hydraulic Hoses
 - Bleeding the Hydraulic Cylinders
 - Final Checklist Before Operation
 - Test the QuickJack
 - Leave the Manual with the Owner/Operator
 
 - Operation
 - Maintenance
 - Troubleshooting
 - Wiring Diagrams
 - Labels
 - Parts Sheets
 - Automotive Lift Institute (ALI) Store
 - Maintenance Log
 - CE Documentation
 
QuickJack™ Portable Car Jack  41  P/N 5900959 — Rev. J3 — Oct. 2019 
19. Visually check to make sure both QuickJack Frames are engaged on the same locking position. 
Not necessarily to scale. Not all components shown. Shows Release Cam and Lock Bar in Locked 
Position. 
⚠ WARNING  Before doing anything else (like starting work on the Vehicle or leaving the area), 
visually confirm
 that 
both
 QuickJack Frames are on the same locking positions 
and that all Lift Blocks are in contact with the factory-recommended Lifting Points 
of the Vehicle. 
You can work on your Vehicle once you have visually confirmed that both Frames are engaged on the 
same locking position and that all Lift Blocks are in contact with the Vehicle at the factory-
recommended Lifting Points. 
⚠ WARNING  Do not work under an elevated Vehicle unless properly rated Vehicle Jack Stands in 
place at the factory-recommended Lifting Points. 










